The Makino V77L (50 Taper) is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Makino Professional 6 (SGI.5). a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino V77L (50 Taper): 1,500 x 700 x 650 mm travels, 1,650 x 700 mm table, CAT50 spindle, tools to 145 mm, 2,500 kg load, 30 tools (40 optional).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Makino Professional 6 (SGI.5) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | CAT50 (HSK-A100 opt) |
| Table / Platter / Chuck Size | 1,650 x 700 mm (65.0 x 27.6 in) |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,500 mm (59.1 in) |
| Y-Axis Travel | 700 mm (27.6 in) |
| Z-Axis Travel | 650 mm (25.6 in) |
| Max Spindle Speed | 20,000 RPM |
| Spindle Taper | CAT50 (HSK-A100 opt) |
| Table Size | 1,650 x 700 mm (65.0 x 27.6 in) |
| Max Workpiece Size | 1,650 x 700 x 550 mm (65.0 x 27.6 x 21.7 in) |
| Table Load Capacity | 2,500 kg (5,512 lb) |
| Rapid Traverse | 787 in/min |
| Cutting Feedrate | 787 in/min |
| Tool Capacity | 30 (40 opt) |
| Tool Change Time | 5 sec |
| Max Tool Diameter | 145 mm (5.71 in) |
| CNC Control | Makino Professional 6 (SGI.5) |
| Spindle Rpm | 20,000 |
| Maximum Workpiece | 55.1" x 27.6" x 21.7" |
| Maximum Payload | 5,500 lbs |
| Tool To Tool | 5 secs |
| Maximum Tool Diameter | 5.7" |
| Optional Atc Capacity | Yes |
According to secondary market equipment benchmarks for November 2026, the Makino V77L (50 Taper) is estimated between $53,500 and $98,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $829 / month.
The listed table gives 20,000 RPM, which is the same as the 40-taper version and far above the 12,000 RPM listed for the V77 (50 Taper). Treat it as unconfirmed: check the spindle plate or the speed limit set in the control before quoting work on it.
Travels, table and the 2,500 kg (5,512 lb) load are the same. The 50-taper version takes CAT50 or HSK-A100 tools up to 145 mm (5.71 in). The V77L (40 Taper) takes CAT40 or HSK-A63 tools up to 120 mm (4.72 in) and 8 kg (17.6 lb).
One row gives the maximum workpiece as 1,650 x 700 x 550 mm (65.0 x 27.6 x 21.7 in), the length of the table, while X travel is 1,500 mm (59.1 in). A second row gives 55.1 x 27.6 x 21.7 in, which looks copied from the shorter V77, so measure the machine if the part is near the limit.
30 as standard, with a 40-tool magazine listed as an option, and a 5 sec tool change. Because CAT50 tools up to 145 mm (5.71 in) across can block the pockets beside them, the number of large tools that fit at once may be lower.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.