The 3D Systems DMP Flex 350 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
3D Systems DMP Flex 350: 500W fiber laser, 275 x 275 x 420 mm build volume, layers from 5 μm (typical 30, 60, 90 μm), 250°C platform heating.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | 3D Systems (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Laser Power Type | 500W/Fiber laser |
| Laser Wavelength | 1070 nm |
| Build Volume | 275 x 275 x 420 mm, height inclusive of build plate |
| Layer Thickness | Adjustable, minimum 5 μm, typical values: 30, 60, 90 μm |
| Material Deposition | Soft blade recoater |
| Repeatability | Δx (3σ) = 60um, Δy (3σ) = 60um, Δz (3σ) = 60um |
| Minimum Feature Size | 200 μm |
| Typical Accuracy | ± 0.1-0.2% with ± 100 μm minimum |
| Build Platform Heating | 250°C |
According to secondary market equipment benchmarks for November 2026, the 3D Systems DMP Flex 350 is estimated between $51,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
One. 3D Systems lists the laser as a 500W fiber laser with a wavelength of 1070 nm. All scanning in the 275 x 275 x 420 mm build volume is done by that one beam, so build time depends directly on how much area each layer exposes.
Layer thickness is adjustable with a 5 μm minimum. The typical values 3D Systems gives are 30, 60 and 90 μm. A build at 90 μm needs a third of the layers of the same build at 30 μm, at the expense of a rougher stair-step on angled faces.
Yes. Build platform heating is listed at 250°C. Powder is applied with a soft blade recoater. The 420 mm build height is quoted inclusive of the build plate, so the usable part height is a little less than that.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.