The AKS Cutting Systems water-kut X2 is an industrial-grade Fiber Laser Cutting Machines powered by the Mitsubishi M80W industrial CNC controller. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AKS water-kut X2: unitized abrasive waterjet up to 6 ft x 12 ft, 1,200 ipm (30.5 m/min), KMT pumps from 55,000 psi to 90,000 psi.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AKS Cutting Systems (International) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Mitsubishi M80W industrial CNC controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Motion Accuracy | +/- 0.003 in per 3 ft of motion (+/- 0.08 mm per 914 mm) |
| Rapid Traverse | 1,200 ipm (30.5 m/min) |
| Max Cut Width | Up to 6 ft (1.83 m) |
| Max Cut Length | Up to 12 ft (3.66 m) |
| Table Sizes | 5 ft x 5 ft, 5 ft x 10 ft and 6 ft x 12 ft |
| Z Axis Travel | 9.8 in (249 mm) programmable ball screw |
| Table Plate Capacity | 6 in (152 mm) thick full plate load capacity |
| X Axis Drive | Dual synchronized helical rack and pinion drives on both sides |
| Y Axis Drive | Single bridge helical rack and pinion drive |
| Standard Pump | KMT TRILINE direct drive, 55,000 psi (3,792 bar) |
| Pump Pressure Max | 90,000 psi (6,205 bar) with optional KMT PRO-3 intensifier |
| Pump Options | KMT NEO intensifier, 60,000 psi, 30 hp (22.4 kW) or 50 hp (37.3 kW); KMT Pro intensifier, 90,000 psi, 50 hp (37.3 kW), 60 hp (44.7 kW) or 125 hp (93.2 kW); KMT SL-VI intensifier, 60,000 psi, 50 hp (37.3 kW) or 100 hp (74.6 kW); KMT Tri-Line direct drive, 55,000 psi, 30 hp (22.4 kW) |
| Abrasive Hopper | 670 lb (304 kg) bulk feeder hopper with low abrasive sensor |
| CNC Control | Mitsubishi M80W industrial CNC controller |
| Operator Screen | 19 in (483 mm) color touch screen |
| Software | Metamation programming software with CAM and auto true shape nesting |
According to secondary market equipment benchmarks for November 2026, the AKS Cutting Systems water-kut X2 is estimated between $52,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
The brochure says the X2 comes standard with a KMT TRILINE direct drive pump at 55,000 psi (3,792 bar) and can be upgraded to the KMT PRO-3 intensifier at 90,000 psi (6,205 bar). The product page's pump table also lists KMT NEO and SL-VI intensifiers at 60,000 psi, in sizes from 30 hp (22.4 kW) to 100 hp (74.6 kW).
The product page lists 5 ft x 5 ft, 5 ft x 10 ft and 6 ft x 12 ft. Maximum cut width is up to 6 ft (1.83 m) and maximum cut length up to 12 ft (3.66 m). AKS's brochure states that both of the larger sizes use the same chassis, drives and features.
The X2 is a unitized bridge machine with a travel speed of 1,200 ipm (30.5 m/min) and tables up to 6 ft x 12 ft. The water-kut X3 is a 3-sided open cantilever design listed at 800 ipm (20.3 m/min) with tables up to 8 ft x 20 ft. Both are listed at +/- 0.003 in per 3 ft motion accuracy.
A Mitsubishi M80W industrial CNC controller from the M8 Series, with a 19 in (483 mm) color touch screen operator console and Mitsubishi servo motors and drives on the X, Y and Z axes. Programming and nesting are done in a Metamation software package.
According to secondary market equipment benchmarks for November 2026, the AKS Cutting Systems water-kut X2 is estimated between $52,500 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $814 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.