The ATLIX xBUILD 5000 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ATLIX xBUILD 5000: 500 x 500 x 400 mm build volume, 4 x 1 kW TRUMPF fiber lasers, 30 - 150 μm layers, up to 450 cm³/h theoretical. Checked against ATLIX.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ATLIX (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Build Volume | 500 x 500 x 400 mm (19.7 x 19.7 x 15.7 in) |
| Build Rate | 50 - 450 cm³/h (3.1 - 27.5 in³/h), theoretical, 4-laser exposure, recoating excluded |
| Layer Thickness | 30 - 150 μm |
| Laser Power | 4 x 1 kW |
| Number Of Lasers | 4 |
| Beam Diameter | 80 - 200 μm |
| Scan Speed | Max. 3 m/s (118 in/s) |
| Preheating | Up to 200 °C (392 °F) |
| Shielding Gas | Nitrogen, Argon |
| Filter Unit | Saturation, long-term |
| Power Supply | 400 V - 63 A - 50 Hz |
| Machine Dimensions | 2,250 x 3,600 x 2,500 mm (88.6 x 141.7 x 98.4 in) |
| Machine Weight | 6,900 kg (15,212 lb) |
According to secondary market equipment benchmarks for November 2026, the ATLIX xBUILD 5000 is estimated between $50,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
Four. Laser power is listed as 4 x 1 kW from a TRUMPF fiber laser source, and the number of lasers is given as 4 with no optional variant. Beam diameter is 80 - 200 μm.
ATLIX lists 50 - 450 cm³/h (3.1 - 27.5 in³/h) and states that the figure is theoretical, for 4-laser exposure, with recoating excluded. Expect less in practice, because recoating takes time on every layer and not every layer loads all four lasers.
500 x 500 x 400 mm (19.7 x 19.7 x 15.7 in). The xBUILD 3000 has the same 400 mm (15.7 in) height on a 300 x 300 mm (11.8 x 11.8 in) plan, so the xBUILD 5000 adds plan area, not height.
The table lists 400 V - 63 A - 50 Hz. No other voltage or frequency is given for this model, so confirm with ATLIX what is available if your supply differs. Shielding gas is Nitrogen or Argon.
Machine dimensions are 2,250 x 3,600 x 2,500 mm (88.6 x 141.7 x 98.4 in) and the weight is 6,900 kg (15,212 lb). Check floor loading, the route into the building and ceiling clearance before ordering.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.