The AWEA AG5-3220 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 3200 x 2000 x 1000 mm, a top spindle speed of 24,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA AG5-3220 gantry 5-axis: 3,200 mm X on linear motors at 60 m/min, 3,200 x 2,000 mm fixed table, 24,000 rpm HSK-A63 spindle, 45,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,200 mm |
| Y-Axis Travel | 2,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Taper Interface | HSK-A63 |
| Table / Platter / Chuck Size | 3,200 x 2,000 mm (126.0 x 78.7 in) |
| Max Table Load Capacity | 3,000 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Rapid Traverse Rate | 60 m/min (2,362 ipm) |
| Approx. Machine Weight | 45,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,200 mm (126.0 in) |
| Y Axis Travel | 2,000 mm (78.7 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 3,200 x 2,000 mm (126.0 x 78.7 in) |
| Max Table Load | 3,000 kg/m² |
| Distance Between Columns With Water Eliminator | 3,000 (2,805) mm |
| Distance Spindle Nose To Table | 50 ~ 1,050 mm (2.0 ~ 41.3 in) |
| Distance 90 Deg Spindle Center To Table | 373 ~ 1,373 mm (14.7 ~ 54.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy X Vdi 3441 | P = 0.025 / Full Travel |
| Positioning Accuracy Y Vdi 3441 | P = 0.020 mm / Full Travel |
| Positioning Accuracy Z Vdi 3441 | P = 0.016 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm / Full Travel |
| Repeatability X Vdi 3441 | Ps = 0.018 mm |
| Repeatability Y Vdi 3441 | Ps = 0.015 mm |
| Repeatability Z Vdi 3441 | Ps = 0.012 mm |
| Rapid Traverse Xy | 60 m/min (2,362 ipm) |
| Rapid Traverse Z | 50 m/min (1,969 ipm) |
| Cutting Feed Rate | 1 ~ 20 m/min (39 ~ 787 ipm) |
| Coolant Tank Capacity | 900 L |
| Lubrication Tank Capacity | 4.6 L |
| Hydraulic Tank Capacity | 2.7 L |
| Air Pressure Requirement | 6 ~ 8 (6) kg/cm² |
| Machine Weight | 45,000 kg (99,206 lb) |
| Max Workpiece Dimensions | 3,200 x 2,000 x 1,000 mm (126.0 x 78.7 x 39.4 in) |
| Tool Capacity | 24 T |
| Max Tool Length | 300 mm (11.8 in) |
| Max Tool Weight | 7 kg (15 lb) |
| Max Tool Diameter | Ø100 / Ø125 mm (Ø3.9 / Ø4.9 in) |
| Spindle Taper | HSK-A63 |
| Spindle Power S1 S6 40 | 42 / 55 kW (56.3 / 73.8 hp) |
| Max Spindle Speed | Built-in 24,000 rpm |
| T Slots | 28 x 200 mm |
According to secondary market equipment benchmarks for November 2026, the AWEA AG5-3220 is estimated between $167,000 and $333,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,589 / month.
No. The table gives 60 m/min (2,362 ipm) for X and Y and 50 m/min (1,969 ipm) for Z on the AG5-3220, the same as on the AG5-1620. X and Y are driven by linear motors, so there is no long ball screw whose critical speed would limit the axis. The cutting feed rate range is 1 ~ 20 m/min (39 ~ 787 ipm).
Under the VDI standard, X positioning is P = 0.025 over full travel and X repeatability is Ps = 0.018 mm. Under JIS the table gives ± 0.010 mm positioning and ± 0.003 mm repeatability over full travel. For parts that need the tighter VDI figure across their length, compare the AG5-1620, listed at P = 0.016 and Ps = 0.012 mm.
The maximum workpiece dimensions are 3,200 x 2,000 x 1,000 mm (126.0 x 78.7 x 39.4 in) and the table load is 3,000 kg/m². Spindle nose to table distance runs 50 ~ 1,050 mm (2.0 ~ 41.3 in). With the head turned horizontal, the spindle center sits 373 ~ 1,373 mm (14.7 ~ 54.1 in) above the table. The distance between columns is 3,000 (2,805) mm with the water eliminator.
AWEA states that the spindle reaches thermal stability within 10 minutes from a cold start and that thermal expansion afterwards stays below 0.01 mm. The built-in spindle, the B and C direct drive motors and the X and Y linear motors are all cooled, and closed-loop optical scales are fitted on all linear axes.
Both have 3,200 mm (126.0 in) of X, 1,000 mm (39.4 in) of Z and a weight of 45,000 kg (99,206 lb). The AG5-3220 is the fast one, at 60 m/min (2,362 ipm) in X and Y. The RG5-3225 is wider, with 2,500 mm (98.4 in) of Y, takes tools up to 400 mm (15.7 in) and 8 kg (18 lb), and offers an HSK-A100 head. Its X rapid is 20 m/min (787 ipm).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.