The CHIRON FZ 08 S Five Axis is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 15,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Chiron FZ 08 S Five Axis: single spindle at 15,000 to 40,000 rpm, HSK-A40 or HSK-E40, 450 x 270 x 310 mm travels, 24 to 80 tools, 2.3 s chip-to-chip.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | CHIRON (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Taper Interface | HSK-A40 / HSK-E40 |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Tool Changer | Chain magazine |
| X-Axis Travel | 450 mm |
| Y-Axis Travel | 270 mm |
| Z-Axis Travel | 310 mm |
| Chip To Chip Time | 2.3 s |
| Spindle Count | 1 |
| Max Spindle Speed | 15,000 – 40,000 rpm |
| Spindle Torque | 9 – 23 Nm |
| Spindle Taper | HSK-A40 / HSK-E40 |
| Tool Capacity | 24 – 80 |
| Max Tool Diameter | 47 mm |
| Max Tool Diameter Adjacent Empty | 100 mm |
| Max Tool Length | 200 mm |
| Max Tool Weight | 1.2 kg |
| Rapid Traverse | 75 – 75 – 75 m/min (X – Y – Z) |
| Axis Acceleration | 10 – 15 – 20 m/s² (X – Y – Z) |
According to secondary market equipment benchmarks for November 2026, the CHIRON FZ 08 S Five Axis is estimated between $127,500 and $264,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,976 / month.
Chiron lists maximum speeds from 15,000 to 40,000 rpm, depending on the spindle, with torque from 9 to 23 Nm. The taper is HSK-A40 or HSK-E40. The table does not say which speed pairs with which torque, so confirm that for the spindle on offer.
The chain magazine is listed from 24 to 80 tools. Tools may be up to 47 mm in diameter, or 100 mm with the adjacent pockets empty, up to 200 mm long and up to 1.2 kg. The chip-to-chip time is 2.3 s.
450 mm in X, 270 mm in Y and 310 mm in Z. Rapid traverse is 75 m/min in each axis, and acceleration is 10 m/s² in X, 15 m/s² in Y and 20 m/s² in Z. The machine has one spindle.
It depends on tool size and torque. The FZ 12 S Five Axis lists 550 mm, 400 mm and 400 mm of travel, 12,000 to 30,000 rpm, 11 to 110 Nm and tapers up to HSK-A63. The FZ 08 S Five Axis is smaller and faster: 450 mm, 270 mm and 310 mm, up to 40,000 rpm, but no more than 23 Nm and 1.2 kg per tool.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.