The AWEA LG-10050 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 5000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10050: 10,000 x 5,000 x 1,000 mm gantry 5-face machining center with a 10,000 x 4,800 mm fixed table, 2,500 kg/m², CAT50, 20 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 5,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 4,800 mm (393.7 x 189.0 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 5,000 mm (196.9 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 4,800 mm (393.7 x 189.0 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 5,800 (5,500) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.030 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,900 liter |
According to secondary market equipment benchmarks for November 2026, the AWEA LG-10050 is estimated between $156,500 and $313,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,426 / month.
X travel is 10,000 mm (393.7 in) on all of them. The LG-10040 has 4,000 mm (157.5 in) of Y travel and a Y rapid of 15 m/min (591 ipm). The LG-10050 has 5,000 mm (196.9 in) and 12 m/min (472 ipm). The LG-10070 has 7,000 mm (275.6 in) and 10 m/min (394 ipm), so the cross axis slows as it widens. The X-axis accuracy figures are identical at P = 0.050 mm and Ps = 0.038 mm.
Not in the table. X rapid traverse is 20 m/min (787 ipm), the same figure AWEA lists for the LG-6050 and LG-8050. What widens with length is X-axis positioning accuracy, which is P = 0.050 mm under the VDI standard on this model.
AWEA describes a separate type coolant tank and two rotating chip augers on both sides of the working table. The coolant tank capacity of the LG-10050 is 1,900 liter. The hydraulic tank holds 120 liter and the lubrication tank 6 liter.
The row is printed as 5,800 (5,500), where the figure in brackets applies with the water eliminator. The table between them is 4,800 mm wide and Y travel is 5,000 mm (196.9 in). On the LG-10070 the same row reads 7,800 mm (7,500 mm).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.