The AWEA LG-10070 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 7000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10070: gantry 5-face machining center with a 7,000 mm Y crossbeam, 10,000 mm X travel, 10,000 x 6,800 mm fixed table and CAT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 7,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 6,800 mm (393.7 x 267.7 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 7,000 mm (275.6 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 6,800 mm (393.7 x 267.7 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 7,800 mm (7,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 10 m/min (394 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.040 mm / Full Travel (Optical linear scale) |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.030 mm (Optical linear scale) |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 2,100 liter |
According to secondary market equipment benchmarks for November 2026, the AWEA LG-10070 is estimated between $160,500 and $319,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,488 / month.
It deals with the sag of a very wide beam. AWEA describes it as a patented design that minimises the deformation caused by the weight of the 7,000 mm super wide crossbeam while keeping machining accuracy. The LG-10070 and the LG-20070 are the two models in the spec tables with that crossbeam.
Width. The LG-10070 has 7,000 mm (275.6 in) of Y travel and a 10,000 x 6,800 mm (393.7 x 267.7 in) table; the LG-10050 has 5,000 mm (196.9 in) of Y and a 10,000 x 4,800 mm (393.7 x 189.0 in) table. Against the LG-10050, Y rapid is 10 m/min (394 ipm) instead of 12 m/min (472 ipm) and the coolant tank is 2,100 liter instead of 1,900 liter. X travel, X rapid and X accuracy are the same.
For Y/Z, the table says so: P = 0.040 mm / Full Travel (Optical linear scale) and Ps = 0.030 mm (Optical linear scale). For X, AWEA states that models with X-axis travel 6 m and above combine a rack & pinion drive with a 1µm high resolution linear scale, and the listed figures are P = 0.050 mm and Ps = 0.038 mm.
The distance between columns is listed as 7,800 mm (7,500 mm), the second figure with the water eliminator fitted. The table is 6,800 mm wide and Y travel is 7,000 mm (275.6 in). Height under the spindle nose runs from 200 ~ 1,200 mm (7.9 ~ 47.2 in).
The air pressure requirement is 5 ~ 8 kg/cm². Electrical supply is 80 kVA at 220 ±10 % Vac 3 phase 50 / 60 Hz, the same as the rest of the range. The hydraulic tank holds 120 liter and the lubrication tank 6 liter.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.