The DMG MORI DMU 160 p FD duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 160 p FD duoBLOCK: 5-axis mill-turn, DirectDrive table up to 400 rpm, parts to 1,600 mm diameter, 1,675 mm height and 4,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 453 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,600 mm (63 in) |
| Max Workpiece Height | 1,675 mm (65.9 in) |
| Max Workpiece Weight | 4,500 kg (9,920.8 lb) |
| X-Axis Travel | 1,600 mm (63 in) |
| Y-Axis Travel | 1,600 mm (63 in) |
| Z-Axis Travel | 1,100 mm (43.3 in) |
| Spindle Torque | 737.6 ft lb (powerMASTER 1000 motorspindle); 1,327.6 ft lb (5X torqueMASTER) |
| Tool Capacity | 453 tool pockets (wheel magazine) |
| Spindle Motor Power | 103.3 hp (powerMASTER 1000 motorspindle); 69.7 hp (5X torqueMASTER) |
| Table Speed | Up to 400 rpm (DirectDrive table) |
| Tool Replenishment Time | max. 5.6 sec (wheel magazine) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 160 p FD duoBLOCK is estimated between $133,500 and $271,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,069 / month.
The DirectDrive table runs at rotational speeds up to 400 rpm. On a part near the 1,600 mm (63 in) maximum diameter that already means a high surface speed at the rim, so the top speed will mostly be used on smaller diameters. Table torque is not given in the listed data.
The listed data does not say. It gives a maximum workpiece weight of 4,500 kg (9,920.8 lb) and a table speed of up to 400 rpm, without linking the two. Ask DMG MORI for the permitted weight and unbalance across the speed range before planning heavy turned parts.
Both have travels of 1,600 mm (63 in) in X, 1,600 mm (63 in) in Y and 1,100 mm (43.3 in) in Z. The DMU 160 p FD duoBLOCK is the mill-turn version: its DirectDrive table turns at up to 400 rpm, so turning and milling share one setup. The DMU 160 P duoBLOCK is the milling version.
The powerMASTER 1000 motorspindle with 737.6 ft lb and 103.3 hp, and the 5X torqueMASTER with 1,327.6 ft lb and 69.7 hp. A roughing package is listed with up to 50 % higher cutting power. None of these comes with a speed figure in the listed data.
Grinding is listed by DMG MORI as an integrated technology on this model, aimed at surface quality. It lets ground features be finished in the clamping used for turning and milling. The listed data does not describe wheel sizes, dressing or the coolant filtration that grinding needs, so cover these in the quotation.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.