The AWEA LP-5021YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 5000 x 2400 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-5021YF: 5-face bridge machining center with 5,000 mm X travel, 5,020 x 2,010 mm table, 15,000 kg load and 8,000 mm/min cutting feed.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 2,400 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 5,020 x 2,010 mm (197.6 x 79.1 in) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 42,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 2,400 mm (94.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 5,020 x 2,010 mm (197.6 x 79.1 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 8,000 mm/min (0.04 ~ 315 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.030 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 42,000 kg (92,593 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-5021YF is estimated between $161,000 and $319,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,496 / month.
AWEA's table simply lists a lower figure as the travel grows: 20,000 mm/min (787 ipm) on the LP-3021YF, 15,000 mm/min (591 ipm) on the LP-4021YF and 10,000 mm/min (394 ipm) on the LP-5021YF. The maker also fits a vibration absorber to reduce the vibration of the long ball screw, which points to the screw length as the limiting part.
1 ~ 8,000 mm/min (0.04 ~ 315 ipm). That sits between the LP-4021YF at 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) and the LP-6021YF at 1 ~ 5,000 mm/min (0.04 ~ 197 ipm).
On a one-piece base with 4 guide ways. AWEA says the base is enlarged proportional to the length of the travel to eliminate table overhang while keeping structural support. The X and Y axes run on roller type linear guide ways.
15,000 kg (33,069 lb) on a 5,020 x 2,010 mm (197.6 x 79.1 in) table. The next step up in load at this X travel is the LP-5025YF, rated for 18,000 kg (39,683 lb) on a 5,020 x 2,400 mm (197.6 x 94.5 in) table.
Under VDI, P ≤ 0.040 mm over full travel with repeatability of Ps ≤ 0.030 mm. Under JIS, ± 0.015 mm over full travel with repeatability of ± 0.003 mm. The VDI figures are wider than those of the LP-3021YF, which is listed at P ≤ 0.025 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.