The AWEA VP-5012HS is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5000 x 1200 x 760 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-5012HS: 5,000 x 1,200 x 760 mm bridge mill, 8,000 kg table load, 10,000 rpm direct-driven BBT50 spindle, 8 m/min X feed, 28,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 1,200 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (Opt. BBT40) |
| Table / Platter / Chuck Size | 5,000 x 1,100 mm (196.9 x 43.3 in) |
| Max Table Load Capacity | 8,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 28,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 1,200 mm (47.2 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 5,000 x 1,100 mm (196.9 x 43.3 in) |
| Max Table Load | 8,000 kg (17,637 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 1,300 mm (51.2 in) |
| Spindle Taper | BBT50 (Opt. BBT40) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Max Spindle Speed | Direct-driven spindle 10,000 rpm |
| Rapid Traverse X | 8 m/min (315 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 8 m/min (315 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.04 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.03 mm |
| Power Requirement | AC 220 ± 10 % 3 , 60 / 50 Hz / 40 kVA |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Lubrication Tank Capacity | 4.5 liter |
| Hydraulic Tank Capacity | 400 liter (1 HP) |
| Machine Weight | 28,000 kg (61,728 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA VP-5012HS is estimated between $79,000 and $141,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,225 / month.
X rapid is 8 m/min (315 ipm). The VP-1612HS and VP-2012HS list 24 m/min (945 ipm), the VP-3012HS 20 m/min (787 ipm) and the VP-4012HS 10 m/min (394 ipm). Cutting feed here is 8 m/min (315 ipm) as well, so on this machine the rapid and the top programmed feed in X are the same number.
Measured the VDI way, the table gives positioning of P ≤ 0.04 mm over full travel and repeatability of Ps ≤ 0.03 mm. Measured the JIS way, it gives ± 0.010 mm over full travel and ± 0.003 mm. The VDI rows widen with every size step above the VP-3012HS; the JIS rows are printed the same for all five models.
Not within the VP-HS series, which ends at this model. The VP-6012 extends X to 6,000 mm (236.2 in) and is listed with a direct drive spindle of 10,000 rpm and 22 / 26 kW (29.5 / 34.9 hp), and its table load is 5,000 kg (11,023 lb), lower than the 8,000 kg (17,637 lb) here.
A foundation for 28,000 kg (61,728 lb) plus up to 8,000 kg (17,637 lb) on the table, an electrical supply of AC 220 ± 10 % at 60 / 50 Hz with 40 kVA, and air at 5 ~ 7 kg/cm². The hydraulic tank is listed at 400 liter (1 HP) and the lubrication tank at 4.5 liter.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.