The AWEA LP-6021YZF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 2800 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-6021YZF: 6,000 x 2,800 x 1,000 mm 5-face bridge machining center with 18,000 kg table load, 4,000 rpm spindle and 45,000 kg weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 2,800 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 6,020 x 2,010 mm (237.0 x 79.1 in) |
| Max Table Load Capacity | 18,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 45,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 6,020 x 2,010 mm (237.0 x 79.1 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 45,000 kg (99,206 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-6021YZF is estimated between $157,000 and $313,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,434 / month.
The table lists compressed air at 5 ~ 8 (5) kg/cm², a hydraulic unit with a 120 liter tank and 10 HP pump, a 6 liter lubrication oil tank and a 650 liter coolant tank with a 1.5 HP pump. A connected power figure is not given. The foundation has to carry 45,000 kg (99,206 lb) of machine plus up to 18,000 kg (39,683 lb) on the table.
AWEA describes a one-piece base structure with 4 guide ways, enlarged in proportion to the travel. The maker adds a note that X-axis travel longer than 6,000 mm may be built in two sections because of transport limits; the LP-6021YZF sits at 6,000 mm, so confirm the shipping arrangement when ordering.
The LP-6025YZF has a 6,020 x 2,400 mm (237.0 x 94.5 in) table, 3,200 mm (126.0 in) of Y, 2,700 mm (106.3 in) between columns, a 20,000 kg (44,092 lb) load and a weight of 53,000 kg (116,843 lb). The LP-6021YZF is the narrower machine, at 2,800 mm (110.2 in) of Y and 45,000 kg (99,206 lb). Z travel and X travel are identical.
Heavy cuts at modest feed. The standard spindle is 4,000 rpm on a 22 / 26 kW (30 / 35 HP) motor, and cutting feed is 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). Built-in spindles of 6,000 / 8,000 rpm and direct drive spindles of 8,000 / 10,000 rpm are options, but the feed limit stays the same whichever spindle is fitted.
Under VDI AWEA lists Ps ≤ 0.035 mm repeatability and P ≤ 0.050 mm positioning over full travel. Under JIS the figures are ± 0.003 mm and ± 0.015 mm over full travel.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.