The AWEA LP-6025YZF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 3200 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-6025YZF: 6,000 x 3,200 x 1,000 mm 5-face bridge machining center, 20,000 kg table load, 4,000 rpm BT50 spindle, 53,000 kg weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 3,200 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 53,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 53,000 kg (116,843 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-6025YZF is estimated between $158,500 and $316,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,457 / month.
The machine weighs 53,000 kg (116,843 lb) and the table is rated for 20,000 kg (44,092 lb). The table lists air at 5 ~ 8 (5) kg/cm², a 120 liter hydraulic tank, a 6 liter lubrication tank and a 750 liter coolant tank. The power row gives a voltage and tolerance only, so the connected load has to be confirmed with AWEA for the spindle and options ordered.
Not on this column spacing. The LP-6033YZF has 3,900 mm (153.5 in) of Y and 3,500 mm (137.8 in) between the columns at 55,000 kg (121,252 lb). The LP-7033YZF adds X travel of 7,000 mm (275.6 in), weighs 65,000 kg (143,298 lb) and has an X rapid of 7,500 mm/min (295 ipm). Table load is 20,000 kg (44,092 lb) on all three.
Rapid traverse is 10,000 mm/min (394 ipm) on X and Z and 15,000 mm/min (591 ipm) on Y. Cutting feed is 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). By comparison the LP-3025YZF, the shortest machine of the group, has an X rapid of 20,000 mm/min (787 ipm) and a cutting feed up to 10,000 mm/min (394 ipm).
In the VDI rows, yes. The LP-6025YZF is listed at P ≤ 0.050 mm positioning over full travel and Ps ≤ 0.035 mm repeatability, while the LP-3025YZF is listed at P ≤ 0.025 mm and Ps ≤ 0.020 mm. The JIS rows are the same for both: ± 0.015 mm over full travel and ± 0.003 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.