The DMG MORI DMU 80 p FD duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 80 p FD duoBLOCK: 5-axis mill-turn with 800 rpm DirectDrive table, 800 x 1,050 x 850 mm travels, parts to 950 mm and 1,800 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 950 mm (37.4 in) |
| Max Workpiece Height | 1,450 mm (57.1 in) |
| Max Workpiece Weight | 1,800 kg (3,968.3 lb) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 1,050 mm (41.3 in) |
| Z-Axis Travel | 850 mm (33.5 in) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 49.6 hp (5X torqueMASTER) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 958.8 ft lb (5X torqueMASTER) |
| Table Speed | Up to 800 rpm (DirectDrive table, milling and turning in one setup) |
| Linear Guide Width | 2.2 in |
| Ball Screws | ø 2.0 / 2.0 / 2.0 in, internally cooled as standard |
| Machine Availability | 96 % |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 80 p FD duoBLOCK is estimated between $126,000 and $260,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,953 / month.
The DirectDrive table runs at rotational speeds up to 800 rpm, which allows milling and turning in one setup. The usable speed for a particular job depends on the diameter, weight and balance of the part. The listed data gives no turning torque for the table.
DMG MORI names a powerMASTER motorspindle with 737.6 ft lb and 103.3 hp and a 5X torqueMASTER with 958.8 ft lb and 49.6 hp. The torqueMASTER has 30% more torque and the powerMASTER about twice the power. No maximum speed is listed for either, so ask for the speed range before choosing.
Up to 950 mm (37.4 in) in diameter, 1,450 mm (57.1 in) in height and 1,800 kg (3,968.3 lb). Travels are 800 mm (31.5 in) in X, 1,050 mm (41.3 in) in Y and 850 mm (33.5 in) in Z. Because the maximum height exceeds the Z travel, check tool reach on tall parts.
DMG MORI lists grinding as an integrated technology on this model, aimed at surface quality. Together with turning on the DirectDrive table at up to 800 rpm and 5-axis milling, that lets a part be finished in one setup. Wheel sizes and dressing equipment are not described in the listed data.
DMG MORI lists the roughing package with up to 50 % higher cutting power. It is a package on top of the base machine, so it has to be specified on the order. The listed data does not say what the package contains.
The DMU 80 FD eVo has the same 800 mm (31.5 in) of X travel but 650 mm (25.6 in) of Y and 550 mm (21.7 in) of Z. The DMU 80 p FD duoBLOCK has 1,050 mm (41.3 in) of Y and 850 mm (33.5 in) of Z and carries workpieces up to 1,800 kg (3,968.3 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.