The AWEA MCP-16040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 16000 x 4400 x 1400 mm, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MCP-16040 moving column bridge machining center: 16,000 x 4,400 x 1,400 mm travels, 16,000 x 2,800 mm table, 80 kVA, 3,400 liter coolant.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 16,000 mm |
| Y-Axis Travel | 4,400 mm |
| Z-Axis Travel | 1,400 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 16,000 x 2,800 mm (629.9 x 110.2 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 16,000 mm (629.9 in) |
| Y Axis Travel | 4,400 mm (173.2 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 16,000 x 2,800 mm (629.9 x 110.2 in) |
| Distance Spindle Nose To Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns With X Axis Covers | 3,700 mm (3,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.);5,000 / 6,000 Gear Spindle (Opt.);8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 10 / 10 m/min (394 / 394 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 3,400 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
According to secondary market equipment benchmarks for November 2026, the AWEA MCP-16040 is estimated between $156,500 and $313,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,426 / month.
AWEA lists 220 ± 10 % Vac / 80 kVA. The same requirement is printed for all seven lengths of this width, from the MCP-8040 up to the MCP-20040. The spindle motor is 22 / 26 kW (29.5 / 34.9 hp). If the plant supply is a different voltage, a transformer has to be planned, and the table does not mention one.
Coolant 3,400 liter, hydraulic 100 liter, lubrication 6 liter. For comparison, the MCP-16050 lists 4,000 liter of coolant and the MCP-16060 lists 5,400 liter; their hydraulic and lubrication tanks are the same size as here.
The table is 16,000 x 2,800 mm (629.9 x 110.2 in) and does not move, so nothing prevents loading one end while the bridge works at the other, as far as the travels are concerned. AWEA describes a big, open machining area with low side structures. Whether a guarded pendulum arrangement is offered is not stated on the maker's pages.
10 / 10 / 10 m/min (394 / 394 / 394 ipm) for X, Y and Z, with a cutting feed range of 1 ~ 10 m/min (39 ~ 394 ipm). On a 16,000 mm (629.9 in) axis that makes program order important: group operations by position so the bridge does not cross the table more often than needed.
Yes. Standard Z travel is 1,400 mm (55.1 in) with the spindle nose 800 ~ 2,200 mm (31.5 ~ 86.6 in) above the table. The option is 1,600 mm of Z, which brings the nose range to 600 ~ 2,200 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.