The AWEA MCP-18040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 18000 x 4400 x 1400 mm, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MCP-18040: 18,000 mm X moving column five-face machine, 4,400 mm Y, 1,400 mm Z (1,600 mm option), up to 2,200 mm under the BBT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 18,000 mm |
| Y-Axis Travel | 4,400 mm |
| Z-Axis Travel | 1,400 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 18,000 x 2,800 mm (708.7 x 110.2 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 18,000 mm (708.7 in) |
| Y Axis Travel | 4,400 mm (173.2 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 18,000 x 2,800 mm (708.7 x 110.2 in) |
| Distance Spindle Nose To Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns With X Axis Covers | 3,700 mm (3,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.);5,000 / 6,000 Gear Spindle (Opt.);8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 10 / 10 m/min (394 / 394 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 3,400 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
According to secondary market equipment benchmarks for November 2026, the AWEA MCP-18040 is estimated between $152,500 and $307,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,364 / month.
With the Z-axis fully raised the spindle nose is 2,200 mm (86.6 in) above the table top; fully lowered it is 800 mm (31.5 in) with the standard 1,400 mm (55.1 in) Z travel. The usable part height is less than 2,200 mm once tool length, and any attachment head, are subtracted. Tools can be up to 400 mm (15.7 in) long.
According to secondary market equipment benchmarks for November 2026, the AWEA MCP-18040 is estimated between $152,500 and $307,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,364 / month.
It sits in a U-shaped saddle with reinforced front structures that fully surrounds it, guided by four linear guide ways with ten sliding blocks. AWEA states that the design reduces distortion and keeps accuracy when the headstock is fully extended. No stiffness or accuracy value is given in the specification table for this model.
The MCP-16040 has 16,000 mm (629.9 in) of X and the MCP-20040 has 20,000 mm (787.4 in). Y travel, Z travel, spindle, magazine, tanks and power requirement are identical on all three. For more width at the same length, the MCP-18050 has 5,400 mm (212.6 in) of Y and the MCP-18060 has 6,400 mm (252.0 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.