The DMG MORI NMV 3000 DCG is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NMV 3000 DCG: 5-axis machining center, 500 x 350 x 510 mm travels, parts to 350 mm diameter and 100 kg, direct drive rotary axes.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 350 mm (13.8 in) |
| Max Workpiece Height | 300 mm (11.8 in) |
| Max Workpiece Weight | 100 kg (220.5 lb) |
| X-Axis Travel | 500 mm (19.7 in) |
| Y-Axis Travel | 350 mm (13.8 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Rotary Axis Drive | Direct Drive Motor, zero backlash |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NMV 3000 DCG is estimated between $124,500 and $255,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,930 / month.
Up to 350 mm (13.8 in) in diameter, 300 mm (11.8 in) in height and 100 kg (220.5 lb) in weight. The diameter limit equals the Y travel, so a part at the limit uses the whole Y stroke. Count the fixture when you add up the load.
500 mm (19.7 in) in X, 350 mm (13.8 in) in Y and 510 mm (20.1 in) in Z. Z is the longest of the three, which is unusual for a machine this small and gives room above the 300 mm (11.8 in) maximum workpiece height for long tools.
By direct drive motors. DMG MORI describes the rotary axis drive system as having zero backlash and lists high-speed rotation, high-precision indexing, less maintenance and longer product life as the results. The Highlights give no rotary speed or indexing accuracy figure, so request those values if your parts depend on them.
In X and Y travel. The NMV 5000 DCG has 730 mm (28.7 in) of X and 510 mm (20.1 in) of Y against 500 mm (19.7 in) and 350 mm (13.8 in) here. Z travel is 510 mm (20.1 in) on both machines, so the larger model adds travel in the table plane and none along Z.
DMG MORI's Highlights for this model state no spindle speed, power, torque or magazine capacity. They cover the DCG design, the direct drive motors on the rotary axes and ORC technology. Get the spindle and magazine data from DMG MORI with the quotation instead of assuming figures from another model.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.