The AWEA MEGA5 G4037 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 4000 x 3700 x 1200 mm, a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MEGA5 G4037 gantry 5-axis machining center: 4,000 x 3,700 x 1,200 mm travels, 4,000 x 3,800 mm table, HSK-A100 12,000 rpm two-axis head.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 3,700 mm |
| Z-Axis Travel | 1,200 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | HSK-A100 |
| Table / Platter / Chuck Size | 4,000 x 3,800 mm (157.5 x 149.6 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 72,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 3,700 mm (145.7 in) |
| Z Axis Travel | 1,200 mm (47.2 in) (opt. 1,400 mm) |
| Table Size | 4,000 x 3,800 mm (157.5 x 149.6 in) |
| Max Table Load | 2,500 kg / m² |
| Distance Between Columns | 4,800 mm (189.0 in) |
| Distance Spindle Nose To Table | TCH-30F = 200 ~ 1,400 mm (opt. 200 ~ 1,600 mm) TCH-20F = 355 ~ 1,555 mm (opt. 355 ~ 1,755 mm) |
| Distance 90 Deg Spindle Center To Table | TCH-30F = 550 ~ 1,750 mm (opt. 550 ~ 1,950 mm) TCH-20F = 665 ~ 1,865 mm (opt. 665 ~ 2,065 mm) |
| T Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 15 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 20 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter | Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.018 mm |
| Coolant Tank Capacity | 1,600 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 6 ~ 8 kg/cm² |
| Machine Weight | 72,000 kg (158,730 lb) |
| Max Workpiece Length | 4,000 mm (157.5 in) |
| Max Workpiece Width | 3,700 mm (145.7 in) |
| Max Workpiece Height | 1,050 mm (41.3 in) |
According to secondary market equipment benchmarks for November 2026, the AWEA MEGA5 G4037 is estimated between $153,500 and $308,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,379 / month.
Both have 4,000 mm (157.5 in) of X travel and the HSK-A100 12,000 rpm spindle. The MEGA5 P4032 is a fixed bridge with 3,200 mm (126.0 in) of Y and a 4,020 x 2,400 mm (158.3 x 94.5 in) table rated for 15,000 kg (33,069 lb). The G4037 moves the gantry instead, reaches 3,700 mm (145.7 in) in Y over a 4,000 x 3,800 mm (157.5 x 149.6 in) table and rates the load per area at 2,500 kg/m². It suits parts too wide or too heavy for the bridge machine.
AWEA lists ± 0.010 mm positioning over full travel and ± 0.003 mm repeatability under JIS. Under VDI the figures are P = 0.025 mm over full travel and Ps = 0.018 mm. The X axis uses a rack and pinion drive with dual servo motors and dual linear scales, and the head carries absolute encoders as standard equipment.
Two B and C axis heads with direct drive motors. The TCH-30F is the high torque head; AWEA states 314 Nm at 1,540 rpm for it, and the specification table is written for this head at 12,000 rpm with HSK-A100. The TCH-20F is the compact head with a 55 kW motor and up to 24,000 rpm. A hydraulic clamping system locks the axes for cutting at fixed angles.
According to secondary market equipment benchmarks for November 2026, the AWEA MEGA5 G4037 is estimated between $153,500 and $308,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,379 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.