The AWEA MEGA5 G6037 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 3700 x 1200 mm, a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MEGA5 G6037: gantry 5-axis machining center with 6,000 x 3,700 x 1,200 mm travels, 20 m / min X rapid, HSK-A100 12,000 rpm spindle, 20 T magazine.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 3,700 mm |
| Z-Axis Travel | 1,200 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | HSK-A100 |
| Table / Platter / Chuck Size | 6,000 x 3,800 mm (236.2 x 149.6 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 84,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,700 mm (145.7 in) |
| Z Axis Travel | 1,200 mm (47.2 in) (opt. 1,400 mm) |
| Table Size | 6,000 x 3,800 mm (236.2 x 149.6 in) |
| Max Table Load | 2,500 kg / m² |
| Distance Between Columns | 4,800 mm (189.0 in) |
| Distance Spindle Nose To Table | TCH-30F = 200 ~ 1,400 mm (opt. 200 ~ 1,600 mm) TCH-20F = 355 ~ 1,555 mm (opt. 355 ~ 1,755 mm) |
| Distance 90 Deg Spindle Center To Table | TCH-30F = 550 ~ 1,750 mm (opt. 550 ~ 1,950 mm) TCH-20F = 665 ~ 1,865 mm (opt. 665 ~ 2,065 mm) |
| T Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 15 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 20 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter | Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.035 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.026 mm |
| Coolant Tank Capacity | 1,600 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 6 ~ 8 kg/cm² |
| Machine Weight | 84,500 kg (186,287 lb) |
| Max Workpiece Length | 6,000 mm (236.2 in) |
| Max Workpiece Width | 3,700 mm (145.7 in) |
| Max Workpiece Height | 1,050 mm (41.3 in) |
According to secondary market equipment benchmarks for November 2026, the AWEA MEGA5 G6037 is estimated between $157,500 and $314,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,441 / month.
The MEGA5 P6032 has a moving table of 6,020 x 2,400 mm (237.0 x 94.5 in) rated for 20,000 kg (44,092 lb), a 10 m / min X rapid and a 5 m / min cutting feed rate. The G6037 has a fixed 6,000 x 3,800 mm (236.2 x 149.6 in) table loaded at 2,500 kg/m², a 20 m / min X rapid and a 10 m / min cutting feed rate. Narrow parts within the bridge machine's table fit the P6032; wide or very heavy parts, and work that needs the higher feeds, point to the gantry.
20 m / min in X, 15 m / min in Y and 10 m / min in Z, with a cutting feed rate of 10 m / min. The X rapid is the same on every MEGA5 G length, since the gantry is driven by a rack and pinion system and not by a ball screw whose speed falls as it gets longer.
Width. The MEGA5 G6047 has 4,700 mm (185.0 in) of Y travel and a 6,000 x 4,800 mm (236.2 x 189.0 in) table, with a Y rapid of 12 m / min and a weight of 119,500 kg (263,448 lb). Against that MEGA5 G6047 figure, the G6037 has 3,700 mm (145.7 in) of Y, a Y rapid of 15 m / min and weighs 84,500 kg (186,287 lb). X and Z travel, spindle and accuracy figures are the same.
Yes. Standard Z travel is 1,200 mm (47.2 in) and AWEA lists 1,400 mm as an option. With the TCH-30F head that changes the spindle nose to table distance from 200 ~ 1,400 mm to 200 ~ 1,600 mm. The listed maximum workpiece height is 1,050 mm (41.3 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.