The AWEA VP-2012HS is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 2000 x 1200 x 760 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-2012HS: 2,000 x 1,200 x 760 mm bridge machining center, 10,000 rpm direct-driven BBT50 spindle, 24 m/min rapids, 3,500 kg table.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,000 mm |
| Y-Axis Travel | 1,200 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (Opt. BBT40) |
| Table / Platter / Chuck Size | 2,000 x 1,100 mm (78.7 x 43.3 in) |
| Max Table Load Capacity | 3,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 16,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,000 mm (78.7 in) |
| Y Axis Travel | 1,200 mm (47.2 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 2,000 x 1,100 mm (78.7 x 43.3 in) |
| Max Table Load | 3,500 kg (7,716 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 1,300 mm (51.2 in) |
| Spindle Taper | BBT50 (Opt. BBT40) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Max Spindle Speed | Direct-driven spindle 10,000 rpm |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 12 m/min (472 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.02 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.015 mm |
| Power Requirement | AC 220 ± 10 % 3 , 60 / 50 Hz / 40 kVA |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Lubrication Tank Capacity | 4.5 liter |
| Hydraulic Tank Capacity | 400 liter (1 HP) |
| Machine Weight | 16,000 kg (35,273 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA VP-2012HS is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
The HD-2012, whose gear spindle tops out at 6,000 rpm, whose Z runs on box ways and whose table takes 4,500 kg (9,921 lb). The VP-2012HS is built for speed instead: a direct-driven 10,000 rpm spindle, roller type linear guide ways on all three axes and a 3,500 kg (7,716 lb) table. Both machines list a 22 / 26 kW (29.5 / 34.9 hp) spindle motor.
Taper and speed. The VP-2012HS uses BBT50 at 10,000 rpm and accepts tools up to 15 kg (33 lb). The VP-2012HSS uses BT 40 at up to 15,000 rpm, limits tools to 7 kg (15 lb) and lists positioning of ± 0.004 mm (± 0.0002") over full travel. Travels on X and Y are identical.
AWEA prints two sets of figures. In the JIS rows, positioning is ± 0.010 mm over full travel and repeatability is ± 0.003 mm. In the VDI rows, positioning is P ≤ 0.02 mm over full travel and repeatability is Ps ≤ 0.015 mm. The two standards measure differently, so compare like with like when reading another machine's sheet.
No. According to AWEA, the servo motor and strengthened ball screw make a counter balance system unnecessary on Z, and the maker credits that layout with better dynamic response. Z travel is 760 mm (29.9 in) at a rapid of 20 m/min (787 ipm).
Yes, as an option. BBT50 is the taper in the specification table, with BBT40 marked Opt. AWEA's spindle description for the series gives direct-driven speeds of 8,000 ~ 15,000 rpm and built-in motorized speeds of 12,000 ~ 20,000 rpm, so the taper and the speed are chosen together when ordering.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.