The AWEA VP-4012 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4000 x 1200 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-4012: 4,000 x 1,200 x 760 mm bridge-type machining center, 6,000 kg table load, 10 m/min X rapid, 6,000 rpm BT50 gear spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 1,200 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | BT50 / BBT50 (Opt.) |
| Table / Platter / Chuck Size | 4,000 x 1,100 mm (157.5 x 43.3 in) |
| Max Table Load Capacity | 6,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 24,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 1,200 mm (47.2 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 4,000 x 1,100 mm (157.5 x 43.3 in) |
| Max Table Load | 6,000 kg (13,228 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 (#50 gear spindle) |
| Distance Between Columns | 1,300 mm (51.2 in) |
| Spindle Motor Power | 11 / 15 kW (14.8 / 20.1 hp) |
| Max Spindle Speed | Gear Spindle 6,000 rpm |
| Spindle Taper | BT50 / BBT50 (Opt.) |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 10 m/min (394 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy X | A ≤ 0.02 mm |
| Positioning Accuracy Yz | A ≤ 0.012 mm |
| Repeatability X | R ≤ 0.014 mm |
| Repeatability Yz | R ≤ 0.010 mm |
| Coolant Tank Capacity | 465 liter (1.5 HP) |
| Lubrication Tank Capacity | 4.6 liter |
| Hydraulic Tank Capacity | 8 liter (2 HP) |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Power Requirement | AC 220 ± 10 % 3 phase , 60 / 50 Hz / 40 kVA |
| Machine Weight | 24,000 kg (52,910 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA VP-4012 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
AWEA's table simply lists it that way: 10 m/min (394 ipm) for the VP-4012 against 20 m/min (787 ipm) for the VP-3012. The maker gives no reason on the page. What a buyer can take from it is that long X moves on this machine run at feed speed, so cycle estimates should count repositioning time.
According to secondary market equipment benchmarks for November 2026, the AWEA VP-4012 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
Inside the VP series there is none at this length: the 1,600 mm (63.0 in) Y models end with the VP-3016. The SP-4016 pairs 4,000 mm (157.5 in) of X with 1,600 mm of Y, a 4,200 x 1,500 mm (165.4 x 59.1 in) table and a 12,000 kg (26,455 lb) load rating.
Yes. It is listed with 32 tools, optionally 24 or 40, and the same limits: Ø125 mm (Ø4.9 in), or Ø229 mm (Ø9.0 in) next to empty pockets, 350 mm (13.8 in) in length and 15 kg (33 lb) per tool.
The VP-4012HS has the same travels, table load and 24,000 kg (52,910 lb) weight with a direct-driven spindle at 10,000 rpm and 22 / 26 kW (29.5 / 34.9 hp). Its X rapid is also 10 m/min (394 ipm), so the change is in the spindle, not in axis speed.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.