The Feeler QMP-40 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 1020 x 520 x 505 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler QMP-40: 1,020 x 520 x 505 mm travels, 48 m/min X/Y rapids, 10,000 rpm No.40 belt type spindle, 800 kg table, 24 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,020 mm |
| Y-Axis Travel | 520 mm |
| Z-Axis Travel | 505 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.40 |
| Table / Platter / Chuck Size | 1,150 x 520 mm (45.3 x 20.5 in) |
| Max Table Load Capacity | 800 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 1,020 mm (40.2 in) |
| Y Axis Travel | 520 mm (20.5 in) |
| Z Axis Travel | 505 mm (19.9 in) |
| Table Size | 1,150 x 520 mm (45.3 x 20.5 in) |
| Max Table Load | 800 kg (1,764 lb) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Taper | 7/24 Taper No.40 |
| Rapid Traverse X | 48 m/min (1,890 ipm) |
| Rapid Traverse Y | 48 m/min (1,890 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| Tool Capacity | 24 |
According to secondary market equipment benchmarks for November 2026, the Feeler QMP-40 is estimated between $61,000 and $109,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $946 / month.
Travels of 1,020 x 520 x 505 mm (40.2 x 20.5 x 19.9 in), a 1,150 x 520 mm table rated 800 kg (1,764 lb), a 10,000 rpm spindle with 7/24 Taper No.40, rapids of 48/48/30 m/min on X/Y/Z, and 24 tools.
The VMX-1020 has a 12,000 rpm direct-drive spindle, 560 mm of Z and X and Y rapids of 40 m/min. The QMP-40 has a 10,000 rpm belt type spindle, 505 mm of Z and 48 m/min on X and Y. Table size, load and tool count are the same.
Belt type. Feeler states that the QMP-32 and QMP-40 feature 10,000 rpm belt type spindles. The series page gives no power, torque or gear-ratio information.
Feeler says the QMP series can be equipped with an ultrasonic cutting system for brittle or high-hardness materials and with a 20,000 rpm spindle for small-diameter tools. Both are described as options for the series, not as part of the QMP-40 base machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.