The Brother SPEEDIO S300X1N is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Brother CNC-C00 (5-axis simultaneous). It offers working travels of 300 x 300 x 250 mm, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Brother SPEEDIO S300X1N: 300 x 300 x 250 mm travel, A -30 to +120 degree and 360 degree C axes, 16,000 rpm 5.5 kW BT30 spindle, 22-tool ATC.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Brother (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Brother CNC-C00 (5-axis simultaneous) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 300 mm |
| Y-Axis Travel | 300 mm |
| Z-Axis Travel | 250 mm |
| Spindle Motor Rating | 5.5 kW |
| Spindle Taper Interface | BT30 |
| Approx. Machine Weight | 2,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 300 mm (11.8 in) |
| Y Axis Travel | 300 mm (11.8 in) |
| Z Axis Travel | 250 mm (9.8 in) |
| A Axis Tilt | -30 to +120 degrees |
| C Axis Rotation | 360 degrees continuous |
| Spindle Speed | 16,000 rpm |
| Spindle Taper | BT30 |
| Spindle Motor Power | 5.5 kW (7.4 hp) |
| Tool Magazine | 22-position ATC |
| Tool To Tool Time | 0.9 seconds |
| Rapid Traverse | 60 m/min (2,362 ipm) all axes |
| Max Workpiece Diameter | 300 mm (11.8 in) |
| CNC Control | Brother CNC-C00 (5-axis simultaneous) |
| Machine Weight | 2,800 kg (6,170 lb) |
| Xyz | 50m/min×50m/min×56m/min |
According to secondary market equipment benchmarks for November 2026, the Brother SPEEDIO S300X1N is estimated between $51,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
The table on this page lists an A axis tilting from -30 to +120 degrees, a C axis with 360 degrees continuous rotation and a Brother CNC-C00 control for 5-axis simultaneous work. Confirm the configuration of any specific machine with Brother before ordering tooling or fixtures for it.
The maximum workpiece diameter is 300 mm (11.8 in), with linear travel of 300 x 300 x 250 mm (11.8 x 11.8 x 9.8 in). Fixture height plus part height plus tool length must fit within the 250 mm (9.8 in) of Z at every tilt angle.
A BT30 spindle running to 16,000 rpm and rated 5.5 kW (7.4 hp). It suits small end mills, drills and taps in aluminium. No other spindle speed is listed for this model.
The listed weight is 2,800 kg (6,170 lb). The table does not give a footprint, air demand or electrical rating, so ask Brother for the installation drawing before placing the machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.