The Feeler SVW-2217 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-2217 gantry machining center: 2,200 mm X travel, 2,000 × 1,400 mm table, 8 ton load, 15 m/min rapids, 24 to 60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,200 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 8 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,200 mm (86.6 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,000 mm (78.7 in) |
| Table Width | 1,400 mm (55.1 in) |
| Max Table Load | 8 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-2217 is estimated between $79,500 and $142,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,232 / month.
Both tables are 2,000 mm long. The SVW-2217 is 1,400 mm wide and rated for 8 ton with 15 m/min rapids; the SVW-2113 is 1,100 mm wide and rated for 4 ton with 24 m/min on X and Y. The SVW-2217 also lists a 60-tool magazine option.
24 as listed, with bracketed alternatives of 32, 40 or 60. The 60-tool figure appears from this width class upward; the narrower SVW-2113 stops at 40.
800 mm (31.5 in), with 1,000 mm (39.4 in) in brackets as the taller alternative. Z rapid traverse is 15 m/min (591 ipm). The clearance under the spindle nose is not given in the series table.
That is how Feeler presents it. The series heading reads Heavy Cutting Machines with Exceptional Rigidity, and the spindle uses a fully geared internal transmission with a two-speed gearbox for high-torque output at low speed. No torque figure is published.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.