The Feeler FDM-7228 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 7200 x 2700 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-7228 mould machining center: 7,200 × 2,700 mm X/Y travel, 7,000 × 2,600 mm table, 24 (27) ton load, 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 7,200 mm |
| Y-Axis Travel | 2,700 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 24 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 7,200 mm (283.5 in) |
| Y Axis Travel | 2,700 (3,300) mm (106.3 (129.9) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 7,000 mm (275.6 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 24 (27) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-7228 is estimated between $83,000 and $147,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,287 / month.
The series page leaves it open. Feeler says a rack and pinion drive with reduction gearbox is used for X-axis travel over 7200 mm, and this model's X travel is 7,200 mm (283.5 in), exactly at that figure. Ask the maker which drive this length receives.
24 ton as listed, with 27 ton in brackets, on a table 7,000 mm long and 2,600 mm wide. The same pair of figures appears for the shorter but wider FDM-6232.
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-7228 is estimated between $83,000 and $147,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,287 / month.
The FDM-8228, with 8,200 mm of X travel and an 8,000 mm table rated at 27 (30) ton. The FDM-7228 is one step below it at 7,200 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.