The Ermak Power-Bend Falcon 2600-60 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 2600-60: 2,600 mm bending length, 60 Ton, 200 mm/s rapid approach, motorized crowning, 7.5 kW, 5,700 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 500 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,700 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 2,600 mm (102.4 in) |
| Bending Power | 60 Ton (66 US tons) |
| Distance Between Columns | 2,200 mm (86.6 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 165 mm/s (6.5 in/s) |
| Crowning | Motorized |
| X Axis Travel | 500 mm (19.7 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,450 mm (175.2 in) |
| Height | 2,580 mm (101.6 in) |
| Width | 1,800 mm (70.9 in) |
| Machine Weight | 5,700 kg (12,566 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 2600-60 is estimated between $44,000 and $79,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
For long, light parts. It offers 2,600 mm of bending length with a 200 mm/s rapid approach and motorized crowning, in a machine weighing 5,700 kg with a 7.5 kW motor.
The Power-Bend Falcon 2600-100 raises bending power to 100 Ton and X-axis travel to 800 mm, and weighs 6,273 kg. This model has 60 Ton, 500 mm of X travel and a 10 mm/s working speed.
Ermak's table gives bending power, not a thickness chart. 60 Ton over the full 2,600 mm is a light-gauge rating; thicker material is possible on shorter bends with a suitably wide die.
Ermak lists pneumatic rear supports, a sheet extraction system, an LED bar guiding system and a laser bend line as options. The standard machine comes with 2 front sheet supports.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.