The Dener TMC 1300 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 1300 x 700 x 700 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TMC 1300 vertical machining center: 1,300 x 700 x 700 mm travels, 11/30 kW spindle, 191 Nm, BBT 40, 1,200 kg table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,300 mm |
| Y-Axis Travel | 700 mm |
| Z-Axis Travel | 700 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | BBT 40 |
| Table / Platter / Chuck Size | 1,450 x 700 mm |
| Max Table Load Capacity | 1,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xyz | 36/36/36 m/min |
| Cutting Feed Rate | 1~15 m/min |
| X Axis Travel | 1,300 mm (51.2 in) |
| Y Axis Travel | 700 mm (27.6 in) |
| Z Axis Travel | 700 mm (27.6 in) |
| Table Size | 1,450 x 700 mm |
| Max Table Load | 1,200 kg (2,646 lb) |
| Spindle Taper | BBT 40 |
| Max Spindle Speed | 10,000 rpm |
| Spindle Motor Power | 11/30 kW |
| Spindle Torque | 77.8/191 Nm |
According to secondary market equipment benchmarks for November 2026, the Dener TMC 1300 is estimated between $58,500 and $106,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $907 / month.
The spindle motor (11/30 kW and 77.8/191 Nm, against 7.5/18 kW and 47.7/115 Nm on the TMC 1200), the Y and Z travels (700 mm each) and the table load (1,200 kg).
1,300 mm in X, 700 mm in Y and 700 mm in Z. The table dimensions are 1,450 x 700 mm and it carries 1,200 kg (2,646 lb).
Rapid traverse is 36 m/min on X, Y and Z. The cutting feed rate is listed as 1~15 m/min and the spindle speed as 10,000 rpm.
Yes. 4th axis preparation is standard equipment, and a CNC rotary table with 4th axis is listed as an option to be ordered with the machine.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.