The Dener TTC-6(C) is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TTC-6(C) CNC lathe: 275 mm turning diameter, 362 mm machining length, 6 inch chuck, 6,000 rpm, 45 mm bar capacity, 560 mm swing.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~5 m/min |
| Swing Diameter | 560 mm (22 in) |
| Max Turning Diameter | 275 mm (10.8 in) |
| Max Turning Length | 362 mm (14.3 in) |
| Chuck Size | 6 inch (152 mm) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Motor Power | 11/20.4 kW |
| Spindle Bore | 56 mm (2.2 in) |
| Bar Capacity | 45 mm (1.8 in) |
According to secondary market equipment benchmarks for November 2026, the Dener TTC-6(C) is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
Two rows of the table. The TTC-6(C) lists a maximum turning diameter of 275 mm (10.8 in) and a machining length of 362 mm (14.3 in); the TTC-6 lists 305 mm (12 in) and 433 mm (17 in). All other rows are identical.
Dener's product page does not say. It prints the TTC-6(C) as a second column next to the TTC-6 without a note, so the meaning of the suffix should be confirmed with Dener or its dealer before ordering.
A 6,000 rpm spindle with a 6 inch (152 mm) chuck and a 56 mm (2.2 in) bore. The spindle motor power is printed as 11/20.4 kW, and bar capacity is 45 mm (1.8 in).
The swing diameter is 560 mm (22 in), the same as the base model. The maximum turning diameter, the figure that limits the actual cut, is 275 mm (10.8 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.