The Dener XL 26100 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener XL 26100 hydraulic press brake: 100 ton over 2,600 mm, 300 mm stroke, 530 mm daylight, 450 mm throat, 11 kW motor, 7,700 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 7,700 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 2,600 mm (102.4 in) |
| Bending Capacity | 100 ton |
| Approach Speed | 160 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 150 mm/sec |
| Stroke | 300 mm (11.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 2,150 mm (84.6 in) |
| Machine Length | 3,320 mm (130.7 in) |
| Machine Width | 2,260 mm (89 in) |
| Width Without Front Support | 1,710 mm (67.3 in) |
| Maximum Height | 2,780 mm (109.4 in) |
| Main Motor Power | 11 kW (14.8 hp) |
| Oil Tank | 190 lt |
| Machine Weight | 7,700 kg (16,975 lb) |
According to secondary market equipment benchmarks for November 2026, the Dener XL 26100 is estimated between $49,000 and $86,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
100 ton over a bending length of 2,600 mm (102.4 in). The side frames are 2,150 mm apart and the throat depth is 450 mm.
According to secondary market equipment benchmarks for November 2026, the Dener XL 26100 is estimated between $49,000 and $86,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
The table lists an 11 kW (14.8 hp) main motor. It does not state voltage or connected load, so those should be confirmed with Dener before installation. The oil tank holds 190 lt.
Length is 3,320 mm, width 2,260 mm including the front supports and 1,710 mm without them, and maximum height 2,780 mm. Weight is 7,700 kg (16,975 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.