The DMG MORI ALX 2500 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI ALX 2500 turning center: 10-inch chuck, 80 mm (3.1 in) bar capacity, 460 mm (18.1 in) max diameter, C-axis indexing accuracy of 5 sec.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 260 mm (10.2 in) |
| Y-Axis Travel | 100 mm (3.9 in) |
| Z-Axis Travel | 575 mm (22.6 in) |
| Max Workpiece Diameter | 460 mm (18.1 in) |
| Max Workpiece Length | 500 mm (19.7 in) |
| Max Bar Capacity | 80 mm (3.1 in) |
| Spindle Type | DDS (Direct Drive Spindle) turnMASTER |
| Chuck Size | 10-inch chuck |
| Distance Between Centers | 500 / 1000 / 2000 type |
| Rapid Traverse | 30 m/min (1,181.1 ipm), X- and Z-axis |
| C Axis Indexing Accuracy | 5 sec. (C-axis indexing accuracy) |
| Guideways | Slideways on the X-axis; linear motion guides on the Y- and Z-axis |
According to secondary market equipment benchmarks for November 2026, the DMG MORI ALX 2500 is estimated between $45,000 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $698 / month.
80 mm (3.1 in). That is more than either neighbouring size: the ALX 2000 takes 65 mm (2.6 in) and the ALX 1500 takes 52 mm (2 in). The chuck is a 10-inch chuck and the maximum workpiece diameter is 460 mm (18.1 in).
DMG MORI states a C-axis indexing accuracy of 5 sec. for the turnMASTER spindle and describes it as high-accuracy contouring. It is the figure to look at on the milling and Y-axis specifications, where the spindle has to position the part for driven tools.
DMG MORI lists distance-between-centers types of 500, 1000 and 2000 and 11 models in total across the turning, milling, Y-axis and spindle 2 specifications. The data table shows a maximum workpiece length of 500 mm (19.7 in) and 575 mm (22.6 in) of Z travel, so check both figures for the longer types.
No. Both list 260 mm (10.2 in) in X, 100 mm (3.9 in) in Y and 575 mm (22.6 in) in Z, and both take a 460 mm (18.1 in) workpiece diameter. The ALX 2500 adds bar capacity, 80 mm (3.1 in) against 65 mm (2.6 in), while the ALX 2000 lists the longer workpiece at 574 mm (22.6 in).
No. Full closed loop control with scale feedback is offered as the SmartSCALE option for enhanced positioning accuracy. The standard machine uses slideways on the X-axis and linear motion guides on the Y- and Z-axis.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.