The DMG MORI CTX 550 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,250 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI CTX 550 lathe: 1,225 mm (48.2 in) turning length, 480 mm diameter, 102 mm bar, ISM102 spindle with 36 / 40 kW and 3,250 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,250 RPM |
| Spindle Motor Rating | 36.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 310 mm (12.2 in) |
| Y-Axis Travel | 130 mm (5.1 in) |
| Z-Axis Travel | 1,225 mm (48.2 in) |
| Max Workpiece Diameter | 480 mm (18.9 in) |
| Max Workpiece Length | 1,225 mm (48.2 in) |
| Max Bar Capacity | 102 mm (4 in) |
| Max Spindle Speed | 3,250 rpm (main spindle ISM102) |
| Spindle Motor Power | 36 / 40 kW (100/40% DC) |
| Spindle Nose | A2-8 |
| Driven Tool Speed | Up to 10,000 rpm (optional DirectDrive turret drive) |
| Spindle Bore | Ø 102 mm (hollow cylinder, ISM102) |
| Sub Spindle Speed | 5,500 rpm (counter spindle ISM 65) |
| Sub Spindle Power | 13/14 kW (100%-40%ED), counter spindle ISM 65 |
| Driven Tool Power | 10/11 kW (100%-40%ED), optional DirectDrive turret drive |
| Coolant Pressure | Turrets ready for 50 bar coolant pressure |
According to secondary market equipment benchmarks for November 2026, the DMG MORI CTX 550 is estimated between $49,500 and $97,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
The maximum workpiece length is 1,225 mm (48.2 in), equal to the Z travel. Maximum workpiece diameter is 480 mm (18.9 in). The CTX 450 uses the same X and Y travels with 825 mm (32.5 in) of Z, so the CTX 550 is the choice when parts are too long for it.
An integrated spindle, type ISM102, on an A2-8 nose with a hollow cylinder of Ø 102 mm. DMG MORI gives the drive rating as 36 / 40 kW (100 / 40% duty cycle) and the speed as 3,250 rpm. The spindle motor is water-cooled.
It will make them, but it is not sized for them. The main spindle stops at 3,250 rpm, so small diameters run at low surface speed, and the Ø 102 mm bore and 36 / 40 kW drive are aimed at large stock. The counter spindle is faster at 5,500 rpm, with 13/14 kW.
DMG MORI lists a 6-axis robot interface and a predisposition for Robo2Go, Robo2Go max and Matris. The Highlights also name synchronous (IPM) motors and hydraulic pumps with inverter control as energy-saving features. No integrated unloading device is mentioned for this model.
Direct measuring systems in the X-axis and Y-axis are standard. The C-axis is controlled by a measuring system on the front bearings, and the integrated spindle motors are water-cooled for thermal stability. The Highlights do not mention a direct measuring system for Z, which matters on a 1,225 mm (48.2 in) axis, so ask about it.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.