The DMG MORI DMF 200|8 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 15,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMF 200|8: long-bed machining center with 2,000 x 800 x 850 mm travels, parts to 2,300 mm and 2,000 kg, spindles from 15,000 to 20,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 120 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 2,300 mm (90.6 in) |
| Max Workpiece Width | 850 mm (33.5 in) |
| Max Workpiece Diameter | 1,050 mm (41.3 in) |
| Max Workpiece Height | 900 mm (35.4 in) |
| Max Workpiece Weight | 2,000 kg (4,409.2 lb) |
| X-Axis Travel | 2,000 mm (78.7 in) |
| Y-Axis Travel | 800 mm (31.5 in) |
| Z-Axis Travel | 850 mm (33.5 in) |
| Max Spindle Speed | Spindles from 15,000 to 20,000 rpm |
| Spindle Torque | up to 200 Nm |
| Tool Capacity | up to 120 pockets |
| Max Tool Length | up to 400 mm |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMF 200|8 is estimated between $128,000 and $264,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,984 / month.
Not in the basic version. DMG MORI lists 4-axis machining with the B-axis, and 5-axis machining with a rotary table as an option. The listed maximum workpiece diameter, the figure that matters for a rotating part, is 1,050 mm (41.3 in). If you need simultaneous 5-axis work, make sure the rotary table is in the quotation.
Travels are 2,000 mm (78.7 in) in X, 800 mm (31.5 in) in Y and 850 mm (33.5 in) in Z. The workpiece can be up to 2,300 mm (90.6 in) long, 850 mm (33.5 in) wide and 900 mm (35.4 in) high, with a maximum weight of 2,000 kg (4,409.2 lb).
DMG MORI lists spindles from 15,000 to 20,000 rpm and up to 200 Nm. The tool magazine has up to 120 pockets and takes tools up to 400 mm in length. Both statements describe the range, so the speed, torque and pocket count of the offered machine should be confirmed.
For more length on the same cross-section, the DMF 300|8 FD has 3,000 mm (118.1 in) of X with the same 800 mm (31.5 in) Y and 850 mm (33.5 in) Z. For more room in every direction, the DMF 300|11 has travels of 3,000 × 1,100 × 1,050 mm (118.1 × 43.3 × 41.3 in).
It is an option. DMG MORI describes it as a linear drive in the X-axis together with higher acceleration and feed rate in X, Y and Z. No acceleration or feed figures are listed for it, so ask for them if cycle time on long positioning moves decides the purchase.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.