The DMG MORI DMU 125 P duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 125 P duoBLOCK: 5-axis, 1,250 x 1,250 x 1,000 mm travels, parts to 1,600 mm tall and 2,800 kg, spindles up to 1,327.6 ft lb.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 453 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,250 mm (49.2 in) |
| Max Workpiece Height | 1,600 mm (63 in) |
| Max Workpiece Weight | 2,800 kg (6,172.9 lb) |
| X-Axis Travel | 1,250 mm (49.2 in) |
| Y-Axis Travel | 1,250 mm (49.2 in) |
| Z-Axis Travel | 1,000 mm (39.4 in) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 69.7 hp (5X torqueMASTER) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 1,327.6 ft lb (5X torqueMASTER) |
| Tool Capacity | 453 tool pockets (wheel magazine) |
| Tool Replenishment Time | max. 5.6 sec (wheel magazine) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 125 P duoBLOCK is estimated between $126,000 and $260,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,953 / month.
X and Y each travel 1,250 mm (49.2 in) and Z travels 1,000 mm (39.4 in). The largest workpiece is 1,250 mm (49.2 in) in diameter, 1,600 mm (63 in) in height and 2,800 kg (6,172.9 lb), fixture included. Height is greater than Z travel, so tool reach on tall parts has to be planned.
The DMU 125 monoBLOCK has 1,335 mm (52.6 in) of X, 1,250 mm (49.2 in) of Y and 900 mm (35.4 in) of Z. The DMU 125 P duoBLOCK has 1,250 mm (49.2 in) of X, the same Y and 1,000 mm (39.4 in) of Z. The monoBLOCK is the longer machine in X, the duoBLOCK the deeper one in Z.
A powerMASTER motorspindle with 737.6 ft lb and 103.3 hp, and a 5X torqueMASTER with 1,327.6 ft lb and 69.7 hp. The listed data gives no maximum speed for either and does not say which is standard. A roughing package with up to 50 % higher cutting power is listed in addition.
DMG MORI states that the machine is also available in a mill-turn version, with milling and turning in one setup on a DirectDrive table at rotational speeds up to 500 rpm. That version is the DMU 125 p FD duoBLOCK, which has the same travels of 1,250 mm (49.2 in) in X and Y and 1,000 mm (39.4 in) in Z.
The wheel magazine is listed with 453 tool pockets, and DMG MORI gives a tool replenishment time of max. 5.6 sec. The limits on tool length, diameter and weight are not part of the listed data, so check them for boring bars and large face mills.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.