The DMG MORI DMU 125 p FD duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 125 p FD duoBLOCK: 5-axis mill-turn, DirectDrive table up to 500 rpm, 1,250 x 1,250 x 1,000 mm travels, parts to 2,800 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 453 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,250 mm (49.2 in) |
| Max Workpiece Height | 1,600 mm (63 in) |
| Max Workpiece Weight | 2,800 kg (6,172.9 lb) |
| X-Axis Travel | 1,250 mm (49.2 in) |
| Y-Axis Travel | 1,250 mm (49.2 in) |
| Z-Axis Travel | 1,000 mm (39.4 in) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 69.7 hp (5X torqueMASTER) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 1,327.6 ft lb (5X torqueMASTER) |
| Tool Capacity | 453 tool pockets (wheel magazine) |
| Table Speed | Up to 500 rpm (DirectDrive table) |
| Tool Replenishment Time | max. 5.6 sec (wheel magazine) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 125 p FD duoBLOCK is estimated between $134,000 and $272,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,077 / month.
The DirectDrive table reaches rotational speeds up to 500 rpm. That is the only turning figure in the listed data: table torque and a turning-specific workpiece weight are not given. The speed usable on a given job depends on the diameter and balance of the part and its fixture.
The travels are identical at 1,250 mm (49.2 in) in X, 1,250 mm (49.2 in) in Y and 1,000 mm (39.4 in) in Z. The DMU 125 p FD duoBLOCK is the mill-turn version, with a DirectDrive table for turning at up to 500 rpm. The DMU 125 P duoBLOCK is the milling machine.
DMG MORI lists grinding as an integrated technology on this model, with surface quality as the aim. Combined with turning and 5-axis milling, a part can go from rough to finished in one clamping. Wheel sizes, dressing and coolant filtration for grinding are not described in the listed data and need to be asked for.
Two: a powerMASTER motorspindle with 737.6 ft lb and 103.3 hp, and a 5X torqueMASTER with 1,327.6 ft lb and 69.7 hp. The torqueMASTER has 80% more torque and the powerMASTER more power. Maximum speeds are not listed for either.
The DMU 125 FD monoBLOCK travels 1,335 mm (52.6 in) in X, 1,250 mm (49.2 in) in Y and 900 mm (35.4 in) in Z. The DMU 125 p FD duoBLOCK has 1,250 mm (49.2 in) in X and Y and 1,000 mm (39.4 in) in Z, with a workpiece height of up to 1,600 mm (63 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.