The DMG MORI DMU 200 Gantry is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 200 Gantry: low-gantry 5-axis machine, 4,000 x 2,000 x 1,200 mm travels, 20,000 rpm spindle, 45° or 90° head, 1,968.5 ipm rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 88.6 x 78.7 in (fixed table) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 4,300 mm (169.3 in) |
| Max Workpiece Width | 2,000 mm (78.7 in) |
| Max Workpiece Height | 1,250 mm (49.2 in) |
| Max Workpiece Weight | 20,000 kg (44,092.5 lb) |
| X-Axis Travel | 4,000 mm (157.5 in) |
| Y-Axis Travel | 2,000 mm (78.7 in) |
| Z-Axis Travel | 1,200 mm (47.2 in) |
| Table Size | 88.6 x 78.7 in (fixed table) |
| Max Spindle Speed | 20,000 rpm (compactMASTER spindle) |
| Rapid Traverse | 1,968.5 ipm |
| Head 45 Swivel Range | 90° swivel range, +/- 300° rotating range (45° head) |
| Head 90 Swivel Range | +/- 120° swivel range, +/- 300° rotating range (90° head) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 200 Gantry is estimated between $130,000 and $267,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,015 / month.
Both are for 5-axis machining at up to 20,000 rpm. The 45° head has a 90° swivel range and a +/- 300° rotating range. The 90° head has a +/- 120° swivel range with the same +/- 300° rotating range, and the larger swivel range gives it more reach into side walls and undercuts.
The technical data lists 4,000 mm (157.5 in) of X travel, with 2,000 mm (78.7 in) of Y and 1,200 mm (47.2 in) of Z. DMG MORI describes the X-axis as modularly expandable up to 157.4 in, so that figure is the upper end of the range. The fixed table is listed at 88.6 x 78.7 in, and the length of the basic X axis is not stated.
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 200 Gantry is estimated between $130,000 and $267,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,015 / month.
Rapid traverse is 1,968.5 ipm and the compactMASTER spindle runs at 20,000 rpm. Those figures suit light, fast cuts in aluminium and composites. No acceleration, spindle power or torque is listed, so cycle-time estimates for a specific part need DMG MORI's data.
The DMU 340 Gantry is the larger machine at 6,000 × 2,800 × 1,500 mm (236.2 × 110.2 × 59.1 in). The DMU 200 Gantry travels 4,000 × 2,000 × 1,200 mm (157.5 × 78.7 × 47.2 in) and is the one whose Highlights centre on a 20,000 rpm spindle and a fixed table with open sides.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.