The DMG MORI DMU 75 monoBLOCK 2nd Generation is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 75 monoBLOCK 2nd Generation: 5-axis, 750 x 650 x 560 mm travels, 840 mm and 600 kg workpiece, 8 m² footprint, 4 µm accuracy.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 840 mm (33.1 in) |
| Max Workpiece Height | 500 mm (19.7 in) |
| Max Workpiece Weight | 600 kg (1,322.8 lb) |
| X-Axis Travel | 750 mm (29.5 in) |
| Y-Axis Travel | 650 mm (25.6 in) |
| Z-Axis Travel | 560 mm (22 in) |
| Positioning Accuracy | 4 µm as standard |
| Door Opening | 1,310 mm |
| Footprint | 8 m² |
| Guideways | 45 mm roller guideways in all axes |
| Ball Screws | ø 40 / 50 / 40 mm in all axes; direct driven in X and Y |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 75 monoBLOCK 2nd Generation is estimated between $123,500 and $253,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,914 / month.
8 m²; DMG MORI's Highlights call it the most compact machine. It stands on a three-point support. Allow extra room in front of the 1,310 mm door opening for the crane or lifting device and for the operator.
Yes. DMG MORI states unrestricted crane loading of up to 600 kg through a door opening of 1,310 mm. The figure equals the maximum workpiece weight of 600 kg (1,322.8 lb), so the crane limit does not restrict what the table can carry.
840 mm (33.1 in) in diameter, 500 mm (19.7 in) in height and 600 kg (1,322.8 lb). The axes travel 750 mm (29.5 in) in X, 650 mm (25.6 in) in Y and 560 mm (22 in) in Z, so the outer edge of a full-diameter part is reached by turning the table.
4 µm as standard. The supporting features in the listed data are direct driven ball screws in X and Y, 45 mm roller guideways, a one-piece column, and cooling measures with multi-sensor compensation that are part of the standard machine.
The data listed for the DMU 75 monoBLOCK 2nd Generation does not include spindle speed, spindle power or the number of tool pockets. These have to be confirmed with DMG MORI. The listed figures cover the envelope, the structure, the accuracy and the loading arrangements only.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.