The DMG MORI DMU 80 eVo is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 80 eVo: 5-axis swivel rotary table machine, 800 x 650 x 550 mm travels, 800 mm and 600 kg workpiece, 20,000 rpm standard spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 800 mm (31.5 in) |
| Max Workpiece Height | 600 mm (23.6 in) |
| Max Workpiece Weight | 600 kg (1,322.8 lb) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 650 mm (25.6 in) |
| Z-Axis Travel | 550 mm (21.7 in) |
| Spindle Torque | 147.5 ft lb (speedMASTER 15,000 rpm, option) |
| B Axis Swivel | -5° / +110° |
| Max Spindle Speed | 20,000 rpm (speedMASTER, standard version); 15,000 rpm (speedMASTER, option); 24,000 rpm (motorspindle, option) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMU 80 eVo is estimated between $132,500 and $271,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,054 / month.
The standard version has a speedMASTER spindle with 20,000 rpm. Two options are listed: a speedMASTER with 15,000 rpm and 147.5 ft lb, and a motorspindle with 24,000 rpm. Pick the 15,000 rpm option when torque for larger cutters matters most, and the 24,000 rpm option for small tools.
The B-axis swivels from -5° to +110°. Almost the whole range is on the positive side, so features on steeply angled faces must be approached from that side, with the rotary axis used to turn the part into position.
Up to 800 mm (31.5 in) in diameter, 600 mm (23.6 in) in height and 600 kg (1,322.8 lb). The travels are 800 mm (31.5 in) in X, 650 mm (25.6 in) in Y and 550 mm (21.7 in) in Z. DMG MORI gives the table load as up to 1,322.8 lb.
DMG MORI's Highlights describe mill-turn operation with a C-axis speed of up to 1,200 rpm and a motorspindle with 18,000 rpm, 95.9 ft lb and HSK A63. The listed data does not say whether that belongs to this version or to the DMU 80 FD eVo, which has the same 800 × 650 × 550 mm (31.5 × 25.6 × 21.7 in) travels, so confirm it before planning turned features.
DMG MORI lists cooling of the table unit, table bearings and drives, cooling of the bearings and spindle nuts of the ball screw drives, and cooled guideways in the linear axes X/Y/Z. The purpose is to hold accuracy as the machine heats up during long cycles.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.