The DMG MORI DMF 500 Gantry is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Siemens 840D sl / Heidenhain TNC 640. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMF 500 Gantry: listed 5,000 x 1,500 x 1,000 mm travels, 8,000 kg table load, 12,000 rpm 52 kW spindle. Not in the current lineup; unconfirmed.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Siemens 840D sl / Heidenhain TNC 640 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel Mm | 5000 |
| Y Axis Travel Mm | 1500 |
| Z Axis Travel Mm | 1000 |
| Table Size Mm | 5000 × 1500 |
| Max Table Load Kg | 8000 |
| Spindle Speed Rpm | 12000 |
| Spindle Power Kw | 52 |
| Spindle Torque Nm | 430 |
| Rapid Traverse M Min | 60 |
| Tool Storage Capacity | 60 |
| Max Tool Diameter Mm | 160 |
| Max Tool Length Mm | 500 |
| Max Tool Weight Kg | 15 |
| Positioning Accuracy Mm | 0.008 |
| Repeatability Mm | 0.005 |
| Drive Type | Ballscrew with dual Y-axis drives |
| CNC Control | Siemens 840D sl / Heidenhain TNC 640 |
| Machine Weight Kg | 55000 |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMF 500 Gantry is estimated between $47,500 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $736 / month.
It is not in DMG MORI's current lineup and may be an older model. The data on this page is unconfirmed. For a machine on offer, ask for the original documentation and have the travels, spindle and control checked on site.
The listed travels are 5,000 mm in X, 1,500 mm in Y and 1,000 mm in Z, on a table listed at 5,000 × 1,500 mm with a maximum load of 8,000 kg. None of these figures has been confirmed.
12,000 rpm, 52 kW and 430 Nm. The torque is high enough for roughing steel with large cutters, while the top speed keeps the spindle usable for finishing. Tool storage is listed at 60 tools.
Start with what the table cannot tell you: actual travels, the fitted control (Siemens 840D sl or Heidenhain TNC 640 are listed) and a current accuracy report against the listed 0.008 mm positioning and 0.005 mm repeatability. Then plan transport and foundation for a listed weight of 55,000 kg.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.