The Mazak VC-Ez 26 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VC-Ez 26: 50 × 25.98 × 25 in (1,270 × 660 × 635 mm) travels, 55.12 × 24.02 in table, CAT No.40 spindle at 12,000 rpm, 30 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | CAT No.40 |
| Table / Platter / Chuck Size | 55.12 in (1,400 mm) × 24.02 in (610 mm) |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 55.12 in (1,400 mm) × 24.02 in (610 mm) |
| Spindle Taper | CAT No.40 |
| Max Spindle Speed | 12,000 rpm |
| Spindle Motor 5min Rating | 18 kW (25 HP) (5 min. Rating) |
| Tool Capacity | 30 tools |
| X-Axis Travel | 50 in (1,270 mm) |
| Y-Axis Travel | 25.98 in (660 mm) |
| Z-Axis Travel | 25 in (635 mm) |
According to secondary market equipment benchmarks for November 2026, the Mazak VC-Ez 26 is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
According to secondary market equipment benchmarks for November 2026, the Mazak VC-Ez 26 is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
Travel in X and Y. The VC-Ez 20 has 41.34 in (1,050 mm) of X and 20.08 in (510 mm) of Y; the VC-Ez 26 has 50 in (1,270 mm) and 25.98 in (660 mm). Z is 25 in (635 mm) on both, and both have a CAT No.40, 12,000 rpm spindle with 30 tools.
When the part is taller, longer or deeper than the VC-Ez 26 allows. The VC-Ez 32 has 64.17 in (1,630 mm) of X, 32.08 in (815 mm) of Y and 30.12 in (765 mm) of Z on a 64.17 in (1,630 mm) × 28.35 in (720 mm) table. Its spindle taper and 12,000 rpm top speed are the same as on the VC-Ez 26.
A CAT No.40 spindle with a maximum of 12,000 rpm and a spindle motor rated 18 kW (25 HP) on a five-minute basis. The magazine holds 30 tools. Mazak's table lists no continuous power, no torque and no tool size limits for this model.
Mazak says the VC-Ez series has heavy base, column, saddle and headstock castings designed for high-speed and high-torque cutting, and large headstock castings to resist torsional displacement in heavy side-load milling. The figures to weigh against that are a 40-taper spindle and an 18 kW (25 HP) five-minute motor rating, with no torque listed.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.