The DMG MORI DMV 145 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMV 145: 3-axis fixed-table VMC, 1,450 x 700 x 550 mm travels, 2,000 kg workpieces, 20,000 rpm basic spindle, magazines to 120 pockets.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 1,760 mm (69.3 in) |
| Max Workpiece Width | 700 mm (27.6 in) |
| Max Workpiece Height | 550 mm (21.7 in) |
| Max Workpiece Weight | 2,000 kg (4,409.2 lb) |
| X-Axis Travel | 1,450 mm (57.1 in) |
| Y-Axis Travel | 700 mm (27.6 in) |
| Z-Axis Travel | 550 mm (21.7 in) |
| Max Spindle Speed | 20,000 rpm speedMASTER spindle in basic version |
| Tool Capacity | 20 pockets, disk type magazine with double gripper (basic version) |
| Spindle Options | High-Torque spindle with 15,000 rpm (option); motorspindle SK50/HSK-A100 with 10,000 rpm and 303 Nm (option) |
| Tool Capacity Options | 20, 30, 40, 60 or 120 pockets optionally available (40 only SK50 / HSK A100) |
| Tool Interface | SK40, SK50, HSK A63 and HSK 100 |
| Automation Door | 30.9 x 42.2 in (at the side) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI DMV 145 is estimated between $59,000 and $106,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $915 / month.
The basic version has a speedMASTER spindle with 20,000 rpm. Options are a High-Torque spindle with 15,000 rpm and a motorspindle in SK50 / HSK-A100 with 10,000 rpm and 303 Nm. The choice of spindle also fixes the tool interface and the magazines that go with it.
The basic version has a disk type magazine with 20 pockets and a double gripper. Magazines for SK40, SK50, HSK A63 and HSK 100 are optionally available with 20, 30, 40, 60 or 120 pockets. The 40-pocket magazine is for SK50 / HSK A100 only. Loading is from the front and can be done in parallel with machining.
DMG MORI describes crane loading through a large opening in the cabin roof and automation through a large door at the side measuring 30.9 x 42.2 in. The table is fixed, and workpieces can weigh up to 2,000 kg (4,409.2 lb).
1,450 mm (57.1 in) in X, 700 mm (27.6 in) in Y and 550 mm (21.7 in) in Z. The maximum workpiece is 1,760 mm (69.3 in) long, 700 mm (27.6 in) wide and 550 mm (21.7 in) high, so a part of full length overhangs the X travel.
The DMV 145 is larger on every axis: 1,450 mm (57.1 in), 700 mm (27.6 in) and 550 mm (21.7 in) in X, Y and Z, against 1,100 mm (43.3 in), 600 mm (23.6 in) and 510 mm (20.1 in) on the DMV 110. It takes workpieces up to 2,000 kg (4,409.2 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.