The DMG MORI LASERTEC 3000 DED hybrid is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI LASERTEC 3000 DED hybrid: 3,000 W laser deposition welding plus turning, Z travel 1,562 mm (Type 1500) or 3,062 mm (Type 3000).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Laser Power | 3,000 W |
| X-Axis Travel | 675 mm (26.6 in) |
| Y-Axis Travel | 300 mm (11.8 in) |
| Z-Axis Travel | 1,562 mm (61.5 in) [Type 1500] / 3,062 mm (120.6 in) [Type 3000] |
| Deposition Method | 5-axis material deposition by coaxial nozzle |
| Reactive Materials | Reactive materials such as Ti-6Al-4V (optional) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI LASERTEC 3000 DED hybrid is estimated between $44,500 and $80,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
Z travel. The Type 1500 has 1,562 mm (61.5 in) and the Type 3000 has 3,062 mm (120.6 in). X travel is 675 mm (26.6 in) and Y travel is 300 mm (11.8 in) on both, and both are listed with a 3,000 W laser.
DMG MORI states up to ø 670 × 932 mm with the B axis at 180°, or up to ø 400 × 1,321 mm with the B axis at 90°. It does not say which Z version those sizes belong to, so have them confirmed for the Type 1500 or the Type 3000 as applicable.
By laser deposition welding with powder fed through a coaxial nozzle, under 5-axis control. DMG MORI states that the coaxial nozzle gives a homogeneous powder distribution that is independent of the direction of welding, so the bead does not change with the direction of travel.
Additive manufacturing of reactive materials such as Ti-6Al-4V is listed as an option, so it is not part of the base machine and must be specified on the order. The base machine is listed for metals, and DMG MORI gives copper combined with Inconel as an example of a material combination.
Because the two can alternate within one setup. A section is deposited, the surfaces that need it are machined, and deposition continues. DMG MORI credits this with new part features and names parts with inner channels for cooling and parts in new material combinations as examples.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.