The DMG MORI NHX 5000 4th Generation is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NHX 5000 4th Generation: 20,000 rpm spindle standard, up to 70,000 mm/min feed and 1.2 g, 730 x 730 x 880 mm travels, 500 kg workpiece.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 800 mm (31.5 in) |
| Max Workpiece Height | 1,000 mm (39.4 in) |
| Max Workpiece Weight | 500 kg (1,102.3 lb) |
| X-Axis Travel | 730 mm (28.7 in) |
| Y-Axis Travel | 730 mm (28.7 in) |
| Z-Axis Travel | 880 mm (34.6 in) |
| Max Spindle Speed | 20,000 rpm (speedMASTER, standard) |
| Feed Rate Max | up to 70,000 mm/min |
| Axis Acceleration | up to 1.2 g |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NHX 5000 4th Generation is estimated between $106,500 and $217,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,651 / month.
Yes. DMG MORI lists the speedMASTER spindle with 20,000 rpm as standard and mentions a 400 V specification alongside it. Power and torque are not stated in the Highlights, so request the spindle data sheet before judging the machine for heavy roughing.
The feed drives are quoted at up to 70,000 mm/min and up to 1.2 g of acceleration. Both figures are upper limits. The table's acceleration and deceleration on the Z and B axes are adjusted to the workpiece, so a heavily loaded table will not necessarily move at the maximum values.
Three items are marked as options in DMG MORI's Highlights: the ceiling shower coolant with motor-driven nozzle, the hydraulic and pneumatic interfaces for automation, and the tool visualizer that automates tool measurement. The stainless steel covers and the 20,000 rpm spindle are standard.
Travels are 730 mm (28.7 in) in X, 730 mm (28.7 in) in Y and 880 mm (34.6 in) in Z. The largest workpiece is 800 mm (31.5 in) in diameter and 1,000 mm (39.4 in) in height, with a maximum weight of 500 kg (1,102.3 lb).
The NHX 4000 4th Generation has 560 mm (22 in) of travel in X and Y and 660 mm (26 in) in Z. The NHX 5000 4th Generation is larger on each axis, at 730 mm (28.7 in) in X and Y and 880 mm (34.6 in) in Z.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.