The DMG MORI NHX 5500 is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NHX 5500 horizontal machining center: 800 x 800 x 880 mm travels, 1,000 kg workpiece, 2,362.2 ipm rapids, direct scale feedback.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 800 mm (31.5 in) |
| Max Workpiece Height | 1,100 mm (43.3 in) |
| Max Workpiece Weight | 1,000 kg (2,204.6 lb) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 800 mm (31.5 in) |
| Z-Axis Travel | 880 mm (34.6 in) |
| Rapid Traverse | 2,362.2 ipm (X, Y and Z) |
| Cutting Feed Rate | 2,362.2 ipm (X, Y and Z) |
| Axis Acceleration | X 0.73 G / Y 0.80 G / Z 0.93 G (23.6 / 25.6 / 29.9 ft/s2) |
| Position Feedback | High-resolution direct scale feedback |
| Through Spindle Coolant | Draw-back function for through spindle coolant |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NHX 5500 is estimated between $96,500 and $197,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,496 / month.
800 mm (31.5 in) in diameter, 1,100 mm (43.3 in) in height and 1,000 kg (2,204.6 lb). X and Y travel are both 800 mm (31.5 in), so the diameter is fully within X, but the height limit is greater than the Y stroke and a full-height fixture will not be reachable over its whole height.
Rapid traverse is 2,362.2 ipm on X, Y and Z, and the cutting feedrate is listed at the same 2,362.2 ipm. Maximum acceleration is 0.73 G in X, 0.80 G in Y and 0.93 G in Z, which DMG MORI also gives as 23.6 / 25.6 / 29.9 ft/s2.
Stroke in X and Y. The NHX 5500 has 800 mm (31.5 in) on both axes, and the NHX 5000 has 730 mm (28.7 in). Z travel is 880 mm (34.6 in) on both machines, so the two do not differ in how deep a part or fixture they can work.
Two items: high-resolution direct scale feedback, which measures axis position at the slide instead of inferring it from the drive, and a draw-back function for the through-spindle coolant. No positioning accuracy or repeatability figure is given in the listed data, so ask for the acceptance values.
When the part or fixture outgrows the 800 mm (31.5 in) X and Y strokes or the 880 mm (34.6 in) Z. The NHX 6300 has 1,050 mm (41.3 in) in X, 900 mm (35.4 in) in Y and 1,030 mm (40.6 in) in Z.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.