The DMG MORI NHX 6300 is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NHX 6300 horizontal machining center: 1,050 x 900 x 1,030 mm travels, 1,500 kg workpiece weight, 2,362.2 ipm rapid traverse.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,050 mm (41.3 in) |
| Max Workpiece Height | 1,300 mm (51.2 in) |
| Max Workpiece Weight | 1,500 kg (3,306.9 lb) |
| X-Axis Travel | 1,050 mm (41.3 in) |
| Y-Axis Travel | 900 mm (35.4 in) |
| Z-Axis Travel | 1,030 mm (40.6 in) |
| Rapid Traverse | 2,362.2 ipm (X, Y and Z) |
| Cutting Feed Rate | 2,362.2 ipm (X, Y and Z) |
| Axis Acceleration | X 0.64 G / Y 0.93 G / Z 0.70 G (20.7 / 29.9 / 22.6 ft/s2) |
| Position Feedback | High-resolution direct scale feedback |
| Through Spindle Coolant | Draw-back function for through spindle coolant |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NHX 6300 is estimated between $96,500 and $197,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,496 / month.
1,050 mm (41.3 in) in X, 900 mm (35.4 in) in Y and 1,030 mm (40.6 in) in Z. The workpiece can be up to 1,050 mm (41.3 in) in diameter and 1,300 mm (51.2 in) tall, so the height allowance is greater than the Y stroke and should be read as clearance, not as machinable height.
The maximum workpiece weight is 1,500 kg (3,306.9 lb). Count the tombstone or fixture plate, the clamping and all the parts loaded on it against that figure, not only the weight of one workpiece.
DMG MORI lists 0.64 G in X, 0.93 G in Y and 0.70 G in Z (20.7 / 29.9 / 22.6 ft/s2) without giving a reason. In general each axis moves a different mass, and a lower value means that axis takes longer to reach the 2,362.2 ipm rapid rate on short moves.
Yes, on all three axes. The NHX 5500 has 800 mm (31.5 in) in X and Y and 880 mm (34.6 in) in Z, while the NHX 6300 has 1,050 mm (41.3 in), 900 mm (35.4 in) and 1,030 mm (40.6 in).
The spindle data. The listed figures cover travels, workpiece limits, feed rates and acceleration, but not spindle speed, power, torque or tool shank, and not the tool magazine capacity. Also confirm where the 900 mm (35.4 in) Y stroke sits relative to the table surface.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.