The DMG MORI NT 4250 DCG is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NT 4250 DCG: turn-mill for 660 mm (26 in) x 1,542 mm (60.7 in) parts, 420 mm Y travel, ±120° direct-drive B-axis, 80 mm (3.1 in) bar.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 750 mm (29.5 in) |
| Y-Axis Travel | 420 mm (16.5 in) |
| Z-Axis Travel | 1,650 mm (65 in) |
| Max Workpiece Diameter | 660 mm (26 in) |
| Max Workpiece Length | 1,542 mm (60.7 in) |
| Max Bar Capacity | 80 mm (3.1 in) |
| B Axis Swivel | ±120° |
| B Axis Drive | Direct drive motor (DDM) |
| Tool Spindle Interface | Capto, 2-face contact |
| Tailstock | Digital tailstock as standard |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NT 4250 DCG is estimated between $44,000 and $79,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
Travels and maximum diameter are the same: 750 mm (29.5 in), 420 mm (16.5 in) and 1,650 mm (65 in), and 660 mm (26 in). The NT 4250 DCG takes bar up to 80 mm (3.1 in) and workpieces up to 1,542 mm (60.7 in) long, while the NT 4300 DCG takes 90 mm (3.5 in) bar and 1,498 mm (59 in) workpieces.
±120°. The B-axis has a direct drive motor (DDM) installed in it, and DMG MORI lists simultaneous 5-axis machining of complex parts as a capability of the machine. The tool spindle it carries uses a 2-face contact Capto interface.
Yes. A digital tailstock is equipped as standard on the NT 4250 DCG. With a maximum workpiece length of 1,542 mm (60.7 in) inside 1,650 mm (65 in) of Z travel, that covers shaft work between chuck and center from the base machine.
Driven at the Center of Gravity. DMG MORI pairs it on the NT series with a Box in Box structure and names both as the basis for high-speed, high-accuracy machining. The ram is an octagonal design (ORC) that DMG MORI describes as a solution for heat control during high-speed feed.
The NT 5400 DCG is the next size up, with travels of 1,040 mm (40.9 in) in X, 510 mm (20.1 in) in Y and 2,140 mm (84.3 in) in Z. The NT 4250 DCG travels 750 mm (29.5 in), 420 mm (16.5 in) and 1,650 mm (65 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.