The DMG MORI NZX 4000 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NZX 4000 long-bed lathe: parts to 660 mm (26 in) diameter and 3,000 mm long, 3,100 mm Z, 140 mm Y, spindle holes up to 11.2 in.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 385 mm (15.2 in) |
| Y-Axis Travel | 140 mm (5.5 in) |
| Z-Axis Travel | 3,100 mm (122 in) |
| Max Workpiece Diameter | 660 mm (26 in) |
| Max Workpiece Length | 3,000 mm (118.1 in) |
| Through Spindle Hole | A: φ 5.7 in.; B: φ 7.2 in.; C: φ 11.2 in. |
| Driven Tool Torque | Max. 86.2 ft./lbf. (10%ED) |
| Turret Type | BMT (Built-in Motor Turret) |
According to secondary market equipment benchmarks for November 2026, the DMG MORI NZX 4000 is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Three. DMG MORI lists variation A at 5.7 in, B at 7.2 in and C at 11.2 in. The bore is part of the machine configuration, so it has to be chosen when ordering, based on the largest pipe, tube or bar that must pass through the spindle.
Up to 3,000 mm (118.1 in), on a Z travel of 3,100 mm (122 in). The maximum workpiece diameter is 660 mm (26 in), X travel is 385 mm (15.2 in) and Y travel is 140 mm (5.5 in).
The turret is a BMT (Built-in Motor Turret) with a maximum rotary tool spindle torque that DMG MORI writes as 86.2 ft./lbf. at 10%ED. DMG MORI likens the milling capacity to a machining center with a No. 40 taper spindle. The rating is intermittent, and no continuous torque or rotary tool speed is published.
The NZX 4000 is far longer. It has 3,100 mm (122 in) of Z travel, while the NLX 4000 has 875 mm (34.4 in) on the Type 750 or 1,685 mm (66.3 in) on the Type 1500. X and Y are closer: 385 mm (15.2 in) and 140 mm (5.5 in) on the NZX 4000 against 365 mm (14.4 in) and 120 mm (4.7 in) on the NLX 4000.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.