The DMG MORI DMU 85 monoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 30,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 85 monoBLOCK: 5-axis milling, 935 x 850 x 650 mm travels, parts to 1,040 mm diameter and 1,500 kg, spindle range up to 30,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 30,000 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,040 mm (40.9 in) |
| Max Workpiece Height | 590 mm (23.2 in) |
| Max Workpiece Weight | 1,500 kg (3,306.9 lb) |
| X-Axis Travel | 935 mm (36.8 in) |
| Y-Axis Travel | 850 mm (33.5 in) |
| Z-Axis Travel | 650 mm (25.6 in) |
| Max Spindle Speed | Up to 30,000 rpm (spindle range) |
| Spindle Torque | Up to 430 Nm (spindle range) |
| Tool Capacity | 30 pockets as standard; up to 240 pockets |
| Positioning Accuracy | 5 μm |
| Door Opening Width | 1,500 mm |
| Spindle Warranty | 36 months without hour limit (MASTER spindles) |
Our best estimate for the DMG Mori DMU 85 monoBLOCK is $450,000 - $650,000. This is an estimate for a 5-axis machining centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmu-85-monoblock#price; the request is passed to DMG Mori or an authorised dealer.
1,040 mm (40.9 in) in diameter, 590 mm (23.2 in) in height and 1,500 kg (3,306.9 lb). The X travel is 935 mm (36.8 in), less than the maximum diameter, so check how features near the edge of a full-size part will be reached. The weight includes the fixture.
They apply to different work. The technical data gives a maximum workpiece weight of 1,500 kg (3,306.9 lb). The Mill & Turn line in DMG MORI's Highlights gives workpieces up to ø 1,040 × 590 mm and 1,200 kg, with turning operations up to max. 800 rpm. The lower figure belongs to Mill & Turn work and the higher one is the general limit, so a milling job is planned against 1,500 kg.
The listed data does not name one. DMG MORI describes a spindle range with up to 30,000 rpm or 430 Nm torque, which are the two extremes of the range. MASTER spindles carry a 36-month warranty without hour limit. Ask which spindle is standard and what its power is, since no power figure is listed.
30 pockets as standard, in a machine-integrated tool magazine. Larger magazines go up to 240 pockets. Because the standard size sits at the bottom of that span, a shop running many different parts without re-tooling should decide the magazine size when ordering.
In travels, only slightly. X is 935 mm (36.8 in) on the DMU 85 monoBLOCK and 950 mm (37.4 in) on the DMU 95 monoBLOCK, and both have 850 mm (33.5 in) of Y and 650 mm (25.6 in) of Z. The travels alone will not decide between them, so compare spindle, magazine and workpiece weight on the two quotations.
Yes. DMG MORI lists automation solutions for this machine that can also be retrofitted, and states that accessibility is fully maintained with automation. The door opening is 1,500 mm wide. The types of automation and their pallet or workpiece limits are not detailed in the listed data.
