The Ermak EPL 3/5 Axis Plasma 2560 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak EPL 3/5 Axis Plasma 2560: 2,500 x 6,000 mm cutting area, Hypertherm HPR130XD, 1 to 38 mm, bevel-capable axes, 9,200 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 9,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Cutting Width | 2,500 mm (98.4 in) |
| Cutting Length | 6,000 mm (236.2 in) |
| Total Width | 5,200 mm (204.7 in) |
| Total Height | 2,280 mm (89.8 in) |
| Torch Distance | 300 mm (11.8 in) |
| Table Height | 750 mm (29.5 in) |
| Max Speed | 20 m/min |
| Machine Axes | X, Y, Z, A, B |
| Repeatability | ±0.05 mm (DIN 28206) |
| Torch Height Control | Ermak THC |
| Cutting Capacity | 1 - 38 mm (0.04 - 1.5 in) |
| Power Requirement | 400V, 50Hz, 6 Bar Air |
| Machine Weight | 9,200 kg (20,282 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak EPL 3/5 Axis Plasma 2560 is estimated between $118,500 and $246,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,837 / month.
The cutting width is 2,500 mm (98.4 in) and the cutting length 6,000 mm (236.2 in). Overall, the gantry is 5,200 mm (204.7 in) wide.
The table's capacity of 1 to 38 mm applies to the Hypertherm HPR130XD. Ermak lists the HPR400 XD and XPR power units as options and an oxy-fuel cutting system for thicker work.
According to secondary market equipment benchmarks for November 2026, the Ermak EPL 3/5 Axis Plasma 2560 is estimated between $118,500 and $246,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,837 / month.
Ermak describes the optional 5-axis cutting head as calculating all angles automatically during cutting, for vertical and angular cuts. The machine's table lists the axes X, Y, Z, A, B.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.