The Ermak Fibermak Momentum Gen-5 SM 2.5x1.25 is an industrial-grade Fiber Laser Cutting Machines powered by the Beckhoff. It offers working travels of 2550 x 1270 x 150 mm, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Fibermak Momentum Gen-5 SM 2.5x1.25 fiber laser: 2,500 x 1,250 mm, 1,000 kg pallets, 2.5 G, 141 m/min, 30 s pallet change.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Beckhoff |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,550 mm |
| Y-Axis Travel | 1,270 mm |
| Z-Axis Travel | 150 mm |
| Spindle Taper Interface | Standard |
| Max Table Load Capacity | 1,000 kg |
| Approx. Machine Weight | 12,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Cutting Area | 2,500 x 1,250 mm (98.4 x 49.2 in) |
| Max Table Load | 1,000 kg (2,205 lb) |
| X Axis Travel | 2,550 mm (100.4 in) |
| Y Axis Travel | 1,270 mm (50 in) |
| Z Axis Travel | 150 mm (5.9 in) |
| Acceleration | 2.5 G |
| Max Axis Speed | 141 m/min combined; 100 m/min single axis (X, Y) |
| Max Axis Speed Linear Motor | 170 m/min combined; 120 m/min single axis (X, Y) |
| Pallet Changer | 2 pallets (30 s) |
| Machine Dimensions | 8,190 x 3,460 x 2,200 mm |
| Machine Weight | 12,500 kg (27,557 lb) |
| Machine Axes | 4-Axis (X, Y, Z, U) |
| Positioning Accuracy | ±0.03 mm |
| Repeatability | ±0.015 mm |
| CNC Control | Beckhoff |
| Cad Cam Software | Metalix, Lantek |
| Network Connection | Ethernet |
| Control Panel | 21.5-inch screen 1920 x 1080, alphanumeric keyboard, PLC keys, touchscreen keyboard |
| Laser Power | 2,000, 3,000, 4,000, 6,000, 8,000, 10,000, 12,000, 15,000, 20,000 or 30,000 W (YLS resonators) |
| Max Cutting Thickness Mild Steel | 16, 18, 20, 25, 25 mm (YLS 2000 to YLS 8000) |
| Max Cutting Thickness Stainless Steel | 8, 10, 12, 15, 15 mm (YLS 2000 to YLS 8000) |
| Max Cutting Thickness Aluminum | 6, 8, 12, 15, 15 mm (YLS 2000 to YLS 8000) |
| Max Cutting Thickness Brass | 4, 5, 6, 8, 8 mm (YLS 2000 to YLS 8000) |
| Max Cutting Thickness Copper | 4, 5, 6, 8, 8 mm (YLS 2000 to YLS 8000) |
| Average Consumption | 18, 20, 22, 28, 34 kW (YLS 2000 to YLS 8000) |
| Cutting Head | Precitec Procutter 2.0 (YLS 2000 to YLS 6000) |
| Pulse Frequency | 5 kHz (YLS 2000 to YLS 12000) |
| Power Range | 10-105% (YLS 2000 to YLS 12000) |
| Laser Wavelength | 1070 ± 5 nm (YLS 2000 to YLS 6000) |
| Assist Gases | Steel: oxygen (0.5-6 bar); stainless steel: nitrogen (0.5-25 bar); aluminum: dry air or nitrogen (0.5-25 bar) |
According to secondary market equipment benchmarks for November 2026, the Ermak Fibermak Momentum Gen-5 SM 2.5x1.25 is estimated between $82,500 and $147,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,279 / month.
The working area is 2,500 x 1,250 mm (98.4 x 49.2 in). X travel is 2,550 mm and Y travel 1,270 mm, with 150 mm of Z. Each of the two pallets carries 1,000 kg (2,205 lb).
The table gives two speed lines: servo motors at 100 m/min per axis and 141 m/min combined, and linear motors at 120 m/min and 170 m/min. Ermak's page describes the series with servo motors, so treat the linear figures as a variant to confirm with the maker.
The resonator table runs from 2,000 W to 30,000 W in ten steps. Average consumption is listed as 18 kW with the 2,000 W source and 28 kW with the 6,000 W source.
The Fibermak SL 2.5x1.25 changes pallets in 20 s and is 5,200 mm long but 4,200 mm wide. This machine is 8,190 mm long and 3,460 mm wide, so the choice comes down to the shape of the free floor.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.