The Ermak Power-Bend Falcon 2100-40 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 2100-40: 2,100 mm and 40 Ton, motorized crowning, 170 mm/s return, 5.5 kW motor, 3,885 kg. Specs and review.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 500 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,885 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 2,100 mm (82.7 in) |
| Bending Power | 40 Ton (44 US tons) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 170 mm/s (6.69 in/s) |
| Crowning | Motorized |
| X Axis Travel | 500 mm (19.7 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 80 L (21.1 US gal) |
| Motor Power | 5.5 kW (7.4 hp) |
| Stroke | 170 mm (6.7 in) |
| Daylight | 387 mm (15.2 in) |
| Throat Depth | 350 mm (13.8 in) |
| Table Height | 850 mm (33.5 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 3,600 mm (141.7 in) |
| Height | 2,200 mm (86.6 in) |
| Width | 2,100 mm (82.7 in) |
| Machine Weight | 3,885 kg (8,565 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 2100-40 is estimated between $48,000 and $85,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $744 / month.
Thin sheet up to 2,100 mm long. With 40 Ton available over that length, and a 170 mm stroke inside 387 mm of daylight, it is a machine for shallow bends in light material.
Ermak's table lists motorized crowning for this size, and the product page describes a CNC-controlled motorised crowning system as standard. Hydraulic crowning is offered as an option.
140 mm/s in rapid approach, 10 mm/s in the working stroke and 170 mm/s on the return. The backgauge moves at 500 mm/s in X and 350 mm/s in R.
The Power-Bend Falcon 2100-60 adds tonnage and a larger ram unit: 275 mm stroke, 530 mm daylight and a 410 mm throat, with a 7.5 kW motor, at a weight of 5,085 kg against 3,885 kg for this model.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.